Description
Here you can find a list of spareparts, sorted by productcode. Do you need help? please call us +31-10-2380540 !
Tip: Looking for a specific sparepart? Please use the searchbar on the right-top of the table !
(commonly used terms: PISTON, SET, CYLINDER, SHAFT, SEAL, GASKET, PLATE, VALVE, OIL, F/ , AM/, HG/, etc)
We have spareparts for HG-series, F-series (open compressor types) and the older AM-series. We also have new compressors of all common types on stock.
| Product code | Description 1 | Description 2 |
|---|---|---|
| 1169 | BRACKET F.OIL PRESS.SWITCH | F6 |
| 1219 | BRACKET F.TERMINAL BOARD | AM5 |
| 1220 | BRACKET F.TERMINAL BOARD | AM4 |
| 1221 | BRACKET F.TERMINAL BOARD | AM/AMW 0-3 |
| 1227 | COPPER TUBE ø6X1 | DIN EN 12735 |
| 1280 | COVER TERMINAL BOARD | AM5/601-847 |
| 1281 | COVER TERMINAL BOARD | AM4/306-466 |
| 1282 | COVER TERMINAL BOARD | AM0-3 |
| 1321 | BRACKET F.OIL PRESS.SWITCH | AM/F/FK3 |
| 1352 | T-PIECE 12-16-12 | DIN EN 1254 NO.5130 |
| 1382 | REDUCING PIECE 16A-12 | DIN EN 1254 NO.5243 |
| 1399 | HOSE CLAMP | FOR OIL DISCHARGE HOSE F6-16 |
| 1446 | FIXING DISC F. IMPELLER MOTOR | HA4+5+6,HA3+12P+22P+34P |
| 1447 | HOLDER F.OIL PRESS.SAF.SWITCH | HA/HG/4+5+6,O4+5,F14+16+NH3 |
| 1502 | BRACKET F.TERMINAL BOARD | AMX2/121-4 |
| 1503 | REDUCING PIECE 42A-35 | DIN EN 1254 NR. 5243 |
| 1505 | T-PIECE 35-35-28 | DIN EN 1254 NR.5130 |
| 2137 | REFR.MACHINE OIL RENISO KC68 | |
| 2279 | REFR.MACH.OIL SP46 / 1 LTR.CAN | |
| 2280 | REFR.MACH.OIL SP46 / 5 LTR.CAN | |
| 2281 | REFR.MACH.OIL SP46 /20 LTR.CAN | |
| 2282 | REFR.MACH.OIL SE55 / 1 LTR.CAN | |
| 2283 | REFR.MACH.OIL SE55 / 5 LTR.CAN | |
| 2284 | REFR.MACH.OIL SE55 /10 LTR.CAN | |
| 2287 | REFR.MACH.OIL C150E/ 1 LTR.CAN | |
| 2359 | BOCK OIL C85E / 1 LTR.CAN | |
| 2370 | REFR.MACH.OIL KC68 /20 LTR.CAN | |
| 2381 | REFR.MACH.OIL SEZ32/ 1 LTR.CAN | |
| 2387 | BOCK OIL C85E /10 LTR.CAN | |
| 2411 | RE.MACH.OIL SYNTH68/20 LTR.CAN | |
| 3300 | CYLINDER COVER F.CR | HA/HG34P |
| 3321 | BASE PLATE H=54.5 | FK24+26 |
| 3323 | CYLINDER COVER F.CR, W.BUSH | FK24+26+40+50K |
| 3324 | CYLINDER COVER STANDARD | HA/HG22P+34P, HGX22P CO2 |
| 3327 | BASE PLATE F.OIL SUMPH.,H=50.0 | AMO,AMW/AM/F/FK1 |
| 3352 | REFFLEX-HOSE LINE,DN 2MM | INCL.2x90° ANGLE CONNECTION |
| 3370 | FILTER SUCTION SIDE | AM/F/FK3-5,AM+F3-5NH3,FK26-50, |
| 3372 | OIL STRAINER F.BASE PLATE | F3+AM3/233NH3 |
| 3375 | SHUT-OFF VALVE | F3-5+13NH3 |
| 3378 | DISTANCE PIECE ø55X20 | FDK14 |
| 3381 | CYLINDER COVER | FK20+24+26+30+40+50K |
| 3383 | CYLINDER COVER F.CR, W.BUSH | FK24+26+40+50N,HA/HG/O4 |
| 3384 | CYLINDER COVER | FK24+26+30+40+50N,HA/HG3+4,O4, |
| 3398 | SPACING ROLLER ø30X20 | SAM2,SHH4/650 L |
| 3402 | REFRIGERANT RECEIVER 5,3 LTR. | FLS-5,3 WITH CONSOLE |
| 3407 | BASE ANGLE (PAIR) | SAM1+SAM3-L,-LD,SAM2/95+121SL |
| 3409 | SPACING ROLLER ø30X5 | SAM3,SHH4/650 L |
| 3414 | REFRIGERANT RECEIVER 7,1 LTR. | FLS-7,1 WITH CONSOLE |
| 3418 | BASE ANGLE (PAIR) | SDAM2/95L,SAM3/185+233SL, |
| 3432 | REFRIGERANT RECEIVER 14,5 LTR. | FLS-14,5 WITH CONSOLE |
| 3433 | SPACING ROLLER ø40X29 | SAM3,SAM4+5-8/4POLAR |
| 3434 | FLYWHEEL ø322 | SPB 5-GROOVES F14 |
| 3435 | FLYWHEEL ø322 | SPB 5-GROOVES F16 |
| 3455 | SPACING ROLLER ø40X5 | SAM4/SFD4+5,SHA+SHG4 |
| 3456 | SPACING ROLLER ø25X33 | SAM4+5+13 |
| 3463 | REFRIGERANT RECEIVER 23 LTR. | FLS-23 WITH CONSOLE |
| 3464 | REFRIGERANT RECEIVER 35 LTR. | FLS-35 WITH CONSOLE |
| 3509 | U-BEAM 80X45-800 LG. | DAM4+5 |
| 3515 | PUMP FLANGE | FK4/467A *SÜTRAK* |
| 3535 | SPACING ROLLER ø30X25 | SAM1-SLD,AM2 |
| 3561 | SPACING ROLLER ø40Xø11x25 | SFD5 |
| 3576 | INTERMEDIATE FLANGE OVAL 70MM | FK3-P |
| 3577 | INTERMEDIATE FLANGE OVAL 12MM | FZ16,FK26/670K*MERCEDES-BENZ* |
| 3589 | COMPRESSOR CASING | F3,AM3/233NH3 |
| 3639 | COMPRESSOR CASING | F14/1166+1366 |
| 3640 | COMPRESSOR CASING | F16/1751+2051 |
| 3642 | FRONT BEARING FLANGE | F16/1751+2051 |
| 3643 | CYLINDER COVER STANDARD | F14/1166+1366,F16/1751+2051, |
| 3644 | CYLINDER COVER F.CR | F14/1166+1366,16/1751+2051 |
| 3645 | INTERMEDIATE FLANGE OVAL 75MM | FK40 |
| 3646 | CYLINDER COVER HP-STAGE | FZ16/2051 |
| 3647 | WC.CYLINDER COVER STANDARD | F14/1166+1366,F16/1751+2051 |
| 3648 | WC.CYLINDER COVER F.CR | F14/1166+1366,F16/1751+2051 |
| 3649 | WC.CYLINDER COVER F.SU(BUSH) | F14/1166+1366,F16/1751+2051 |
| 3650 | FRONT BEARING FLANGE | F14/1166+1366 |
| 3653 | CONNECTION LINE MP | FZ16/1570+1800+2051 |
| 3734 | MOTOR FOOT | HA/HG4+5+6,HGX4 CO2 |
| 3743 | MOTOR CASING | HG4/310-555 (+CO2) |
| 3744 | MOTOR CASING | HG4/650 |
| 3745 | MOTOR CASING | HA4/310-650 |
| 3758 | SPACER SLEEVE | F. OIL PRESSURE SAFETY SWITCH |
| 3760 | TERMINAL BOX CPL./PA,BLUE | (UV-STABILIZED) HH3+4+5+6, |
| 3765 | CYLINDER COVER F.SU | FK26+40N,HA/HG3+4,O4 |
| 3777 | OIL STRAINER F.BASE PLATE | F2+AM2/121NH3 |
| 3779 | FILTER SUCTION SIDE | AM+F2NH3 |
| 3780 | COMPRESSOR CASING | F2+AM2/121NH3 |
| 3830 | TERMINAL BOX CPL./ST,BLUE | HA/HGX2+34 CO2 T |
| 3855 | CONNECTING FLANGE FOR NH3 | OIL GAS COMPENSATION, |
| 3865 | MOTOR COVER | HG3 |
| 3866 | MOTOR COVER | HA3 |
| 3876 | BASE PLATE H=17.0 | FK40+50 N+K |
| 3955 | BASE FRAME, PAIR | SDHA/SDHG3 RU |
| 3958 | REAR BEARING FLANGE | F2+AM2/121S NH3 |
| 3959 | REAR BEARING FLANGE,WITH BUSH | F3+AM3/233S NH3 |
| 3960 | REAR BEARING FLANGE,WITH BUSH | F4+5 NH3 |
| 3961 | REAR BEARING FLANGE,WITH BUSH | F14+16 NH3 |
| 3962 | REAR BEARING FLANGE,WITH BUSH | AM5/847S NH3 |
| 3964 | TERMINAL BOX CPL./ST,BLUE | HG7+76e |
| 3996 | CONNECTION LINE MP / ø42 | HGZ7/2110 |
| 4001 | INTERM.ADAPT.F.SUCTION SIDE | FKX40/465+470+650+655K*SPHER.* |
| 4008 | COMPRESSOR CASING | AM/AMWO-1,F/FK1 |
| 4009 | COMPRESSOR CASING | AM-AMW2/58-95 |
| 4010 | COMPRESSOR CASING | AM-AMW2/73-121-F-FK2 |
| 4011 | COMPRESSOR CASING | AM-AMW3/153-4 |
| 4012 | COMPRESSOR CASING | AM+AMW3/185-233,F/FK3 |
| 4016 | MOTOR CASING | AM0-1-2 |
| 4017 | MOTOR CASING | AM3/153-233 |
| 4018 | MOTOR CASING | AM4/306-370-466 |
| 4019 | MOTOR CASING | AM5/601-724-847 |
| 4020 | FRONT BEARING FLANGE | FK30 |
| 4030 | INTERM.ADAPT.F.DIS.SHUT-OFF V. | HG4-6 |
| 4033 | BASE PLATE H=50.0 | AM0,AM/AMW/F/FK1 |
| 4034 | BASE PLATE H=42.0 | AMW/AM/F/FK2 |
| 4035 | BASE PLATE H=20.0 | AMW/AM/F/FK3 |
| 4037 | BASE PLATE H=55.0 | AM/F/FK5 |
| 4039 | CONNECTION LP-SIDE | HGZ7 |
| 4041 | BASE PLATE H=55.0 | AM/F/FK4 |
| 4042 | BASE PLATE H=55.0 | F6+14+16 |
| 4045 | BASE PLATE H=20.0 | FK3A |
| 4046 | BASE PLATE H=55.0 | FK5A |
| 4050 | REAR BEARING FLANGE | F6 |
| 4068 | CASING FOR SU81-4/5 | AM/F/FK4-5 |
| 4069 | CASING-SU | F6 |
| 4082 | CYLINDER COVER | AM0,AM/AMW/F/FK1 |
| 4083 | CYLINDER COVER | AM/AMW/F/FK2 |
| 4084 | CYLINDER COVER | AM/AMW/F/FK3 |
| 4085 | CYLINDER COVER | AM/F/FK5,F6 |
| 4089 | CYLINDER COVER | AM/F/FK4 |
| 4092 | CYLINDER COVER HP-STAGE | FZ6 |
| 4093 | CYLINDER COVER F.CR84 | WITH CASTED SEAT AM/F/FK4 |
| 4096 | WC.CYLINDER COVER STANDARD | AM/F/FK3 |
| 4098 | WC.CYLINDER COVER STANDARD | AM/F/FK4 |
| 4125 | REAR BEARING FLANGE | F4-5,FK5,AM5/600-846 |
| 4127 | REAR BEARING FLANGE | AM0,AM/F1-2,FK2 |
| 4128 | REAR BEARING FLANGE | FK1 |
| 4129 | REAR BEARING FLANGE | AM/F/FK3 |
| 4132 | REAR BEARING FLANGE | AM/FK4 |
| 4138 | FRONT BEARING FLANGE | FK1 |
| 4140 | FRONT BEARING FLANGE | FK3 |
| 4141 | FRONT BEARING FLANGE | F/FK4 |
| 4142 | FRONT BEARING FLANGE | AM4/306-370-466 |
| 4143 | FRONT BEARING FLANGE | F5 |
| 4145 | FRONT BEARING FLANGE | FK5 |
| 4148 | FRONT BEARING FLANGE | FK2 |
| 4157 | ANGLE F.IMPELLER MOTOR AT EFC | HA+HG22P,HA34P, |
| 4160 | COVER PLATE | AM0,AM/AMW/F/FK1-2 |
| 4162 | COVER SUCTION SIDE | AM/F/FK4 |
| 4163 | COVER SUCTION SIDE | AM/F/FK5 |
| 4164 | COVER PLATE | AM/F/FK3-5+13,AMW3 |
| 4166 | SOLDERED BUSH ø42 | CONNECTION SUCTION SIDE HGZ7 |
| 4167 | INTERMEDIATE FLANGE OVAL 46MM | NPTF 1/8" |
| 4183 | FLYWHEEL ø165 | F/FK1 1-GROOVE |
| 4184 | FLYWHEEL ø165 | F/FK2+20 2-GROOVES |
| 4186 | FLYWHEEL ø210 | F/FK3 2-GROOVES |
| 4188 | FLYWHEEL ø210 | 3-GROOVES,F/FK4,FK24+40+50,04 |
| 4189 | FLYWHEEL ø230 | F/FK5 4-GROOVES |
| 4193 | FLYWHEEL ø260 | F6 5-GROOVES |
| 4201 | MOTOR PULLEY ø90 | F1 1-GROOVE |
| 4202 | MOTOR PULLEY ø113 | F1 1-GROOVE |
| 4203 | MOTOR PULLEY ø133 | F1 1-GROOVE |
| 4204 | MOTOR PULLEY ø165 | F1 1-GROOVE |
| 4205 | MOTOR PULLEY ø190 | F1 1-GROOVE |
| 4206 | MOTOR PULLEY ø90 | F2 2-GROOVES |
| 4207 | MOTOR PULLEY ø110 | F2 2-GROOVES |
| 4208 | MOTOR PULLEY ø133 | F2 2-GROOVES |
| 4209 | MOTOR PULLEY ø165 | F2 2-GROOVES |
| 4210 | MOTOR PULLEY ø190 | F2 2-GROOVES |
| 4211 | MOTOR PULLEY ø170 | F3 2-GROOVES |
| 4212 | MOTOR PULLEY ø210 | F3 2-GROOVES |
| 4213 | MOTOR PULLEY ø230 | F3 2-GROOVES |
| 4214 | MOTOR PULLEY ø140 | F4 3-GROOVES |
| 4215 | MOTOR PULLEY ø170 | F4 3-GROOVES |
| 4216 | MOTOR PULLEY ø210 | F4 3-GROOVES |
| 4217 | MOTOR PULLEY ø230 | F4 3-GROOVES |
| 4219 | MOTOR PULLEY ø170 | F5 4-GROOVES |
| 4220 | MOTOR PULLEY ø210 | F5 4-GROOVES |
| 4221 | MOTOR PULLEY ø230 | F5 4-GROOVES |
| 4222 | MOTOR PULLEY ø140 | F3 2-GROOVES |
| 4242 | MOTOR PULLEY ø240 | F5 4-GROOVES |
| 4243 | MOTOR PULLEY ø210 | SPA 5 GROOVES,DW=200,DIN 2211, |
| 4244 | MOTOR PULLEY ø230 | SPA 5 GROOVES,DW=224,DIN2211, |
| 4246 | MOTOR PULLEY ø290 | SPA 5 GROOVES,DW=280,DIN 2211, |
| 4248 | PROTECTING RING | AM2/95+121-4SMF |
| 4269 | BLANK FLANGE 15MM | AM/F/FK4+5,FK26/390-550(N+K), |
| 4271 | BLANK FLANGE 15MM | FK40 *SPHEROS* |
| 4273 | REAR BEARING FLANGE | HG7+76e |
| 4274 | COVER SUCTION SIDE | HG7+76e |
| 4298 | FLANGE OVAL 22MM | DISCHARGE+SUCTION SIDE |
| 4300 | CONNECTING FLANGE | OIL-GAS COMPENSATION, |
| 4312 | CENTRING FLANGE | BLADE AM0-1 L |
| 4318 | TAPERRING | AM-AMW3 |
| 4322 | REFFLEX-HOSE LINE,DN 2MM | INCL.2X90° ANGLE CONNECTION |
| 4323 | REFFLEX HOSE LINE,DN 2MM | INCL.2X90° ANGLE CONNECTION |
| 4329 | FLANGE OVAL 16MM | SHUT-OFF VALVE NW 20,25,32 |
| 4331 | FLANGE FOR IMPELLER ø175 | AM0/1/2W |
| 4332 | FLANGE FOR BLADE | AM3/153-233L |
| 4333 | FLANGE FOR IMPELLER | AM3/153-233 |
| 4341 | SPACING ROLLER ø25X40 | AM4-5 |
| 4343 | TERMINAL BOX CPL./GD,BLUE | HH12P+22P+34P,HGX12+22P CO2 |
| 4344 | FLANGE F.OIL COMPENSATION | VAM2+3,AM,FK,F2+3,DAM0-3 |
| 4346 | FLANGE FOR SIGHT GLASS | OIL GAS COMPENSATION |
| 4351 | PIPE OIL SYSTEM BENT | HG8 |
| 4357 | FRONT BEARING BUSH,CPL. | AM0,AM/AMW1-2 |
| 4358 | FRONT BEARING BUSH,CPL. | AM/AMW3 |
| 4359 | FRONT BEARING BUSH | F/FK4+13,O4+5,F4+5NH3,F5 |
| 4360 | FRONT BEARING BUSH,CPL. | AM4 |
| 4361 | INTERM.ADAPT.F.DIS.SHUT-OFF V. | HG7 |
| 4362 | INTERM.ADAPT.F.DIS.SHUT-OFF V. | HG8 |
| 4366 | SOLDERED BUSH ø22 | FOR PIPE ø22 |
| 4367 | SOLDERED BUSH ø28 | WORKS CERTIFICATE DIN50049-2.2 |
| 4371 | WELD-FITTING 3 1/8" | HG8+88e |
| 4373 | SOLDERED BUSH ø64 | DAM5/601-847 CONNECT. SUCTION |
| 4374 | SOLDERED BUSH ø35 | DAM5 CONNECT.SUCTION SIDE |
| 4375 | TERMINAL BOX CPL./ST,BLUE-BCM | HG8 |
| 4380 | PUMP CASING | AM/F/FK1-2-3,AM0 |
| 4381 | PUMP CASING | AM/F/FK 4-5-13 |
| 4382 | PUMP PLATE | AM/F/FK4+5+13,FK4/467A |
| 4392 | CONNECTION SUCTION SIDE | DAM4 |
| 4400 | CROSS-CONNECTION CASING DAM5 | CONNECTION SUCTION SIDE |
| 4424 | DISC ø50X12.5X12 | DIN 522 C GALV. |
| 4425 | DISC ø50X12.5X8 | ISO 4759-3C GALV. |
| 4426 | FILTER SUCTION SIDE | AM0,AM/F/FK1/FK20 |
| 4429 | FILTER SUCTION SIDE | F/FK/AM/AMW2 |
| 4433 | OIL STRAINER CPL.F.BASE PLATE | F/FK/AM1,AM0,FK20 |
| 4434 | OIL STRAINER CPL.F.BASE PLATE | F/FK/AM/AMW2 |
| 4435 | OIL STRAINER CPL.F.BASE PLATE | F/FK/AM/AMW3 |
| 4442 | OIL STRAINER CPL. | AM/F/FK4+5+13,FK24+26,EX-HG4+5 |
| 4458 | FLANGE FOR IMPELLER | AM4+13 |
| 4465 | TERMINAL BOX CPL./ST,BLUE-BCM | HG7 (WITH BCM) |
| 4469 | FLANGE ROUND | SUCTION SIDE DAM5 |
| 4538 | BASE FRAME | FDK6+14+16 - 11,0-30,0KW |
| 4648 | SOLDERED BUSH ø54 | DAM4 CONNECT.SUCTION SIDE |
| 4652 | FLYWHEEL ø210 | 2 GROVES, FK30 |
| 4713 | DISC W.LOCKING PIN | AM4+5,FKB4 |
| 4715 | BLANK FLANGE 9MM | FK40 |
| 4737 | FRONT BEARING BUSH | AM5/601-724-847,F6+14+16 |
| 4738 | FLANGE FOR BLADE | AM1-2 AIR |
| 4742 | RING FOR MAIN BEARING | FK5 |
| 4770 | FRONT BEARING FLANGE | F6+FZ6 |
| 4772 | COVER PLATE | F6 |
| 4773 | CASING-NON-RETURN VALVE | F6 |
| 4783 | DISC W.BRACKET FIX.PRESS.CONT. | F6 |
| 4786 | DISC F.PRESSURE-A.SUCTION SIDE | F6 |
| 4791 | FRONT BEARING FLANGE | AM5/601-847 |
| 4793 | REAR BEARING FLANGE | AM5/601-724,AM/F/FK13 |
| 4794 | FLANGE FOR IMPELLER | AM5/601-847 |
| 4801 | IMPELLER ø305 | AM4/5 |
| 4804 | OIL STRAINER | F6+14+16 (+NH3) |
| 4826 | CONN.COVER PLATE MP-INJECTION | FZ6 |
| 4845 | REAR BEARING FLANGE | FK-VW3,FK3-P |
| 4916 | HOLDING RING ø18X14X2 | AM/F/FK13 |
| 4964 | BASE PLATE ELEVATED H=105.0 | F6+14+16 |
| 4965 | PRESSURE REGULATOR OIL CPL. | F14+16+18+FK24+26+HG88e |
| 4975 | BASE FRAME | FDK16/37-55KW |
| 4995 | COMPENSATING PLATE 65X60X40 | F.MOTOR,FDK16 |
| 4996 | COMPENSATING PLATE 70X70X20 | F.MOTOR,FDK14+16 |
| 4997 | DISTANCE PIECE ø55X25 | FDK16 |
| 4998 | DISTANCE PIECE ø55X50 | FDK16 |
| 5008 | GASKET-UPPER VALVE PLATE | AM0,AM/F/FK1 |
| 5009 | GASKET-UPPER VALVE PLATE | AM/F/FK2 |
| 5010 | GASKET-UPPER VALVE PLATE | AM/F/FK3+4 |
| 5011 | COMPRESSOR FOOT, 160x30x15MM | FK30 |
| 5012 | GASKET-UPPER VALVE PLATE | AM/F/FK5,F6,FZ6 |
| 5013 | GASKET-UPPER VALVE PLATE | AM/F/FK4 WITH LR84 |
| 5014 | GASKET-UPPER VALVE PLATE | AM/F/FK5+F6 W. LR87, FZ6 HP-ST |
| 5025 | GASKET-LOWER VALVE PLATE ø32 | AM0,AM/F/FK1 |
| 5026 | GASKET-LOWER VALVE PLATE ø45 | AM2/73+121,F/FK2 |
| 5027 | GASKET-LOWER VALVE PLATE ø40 | AM-AMW2/58+95 |
| 5028 | GASKET-LOWER VALVE PLATE ø55 | AM3/185+233,AM4/370-466, |
| 5029 | SEAL RING 10x6x1 | DIN 7603-A,HG7 |
| 5030 | GASKET-LOWER VALVE PLATE ø70 | AM/F/FK5,F6,FZ6 |
| 5032 | GASKET-LOWER VALVE PLATE ø50 | AM3/153, AM4/306 |
| 5043 | GASKET-BASE PLATE | AM0-1/AMW1/F/FK1 |
| 5044 | GASKET-BASE PLATE | AM/AMW/F/FK2 |
| 5045 | GASKET-BASE PLATE | AM/F/FK3/AMW3 |
| 5046 | GASKET-BASE PLATE | AM/F/FK4 |
| 5047 | GASKET-BASE PLATE | AM/F/FK5 |
| 5048 | CYLINDER HEAD SCREW M6X20 | DIN 912 10.9 GALV. |
| 5049 | GASKET-FRONT BEARING FLANGE | F/FK5 |
| 5054 | GASKET-REAR BEARING FLANGE | AM0-2,AMW/F/FK1-2 |
| 5055 | GASKET-FRONT BEARING FLANGE | AM0-2,AMW1-2 |
| 5056 | GASKET-REAR BEARING FLANGE | AM/F/FK3-5+13,AMW3 |
| 5057 | GASKET-FRONT BEARING FLANGE | AM/AMW3 |
| 5058 | GASKET-FRONT BEARING FLANGE | AM/F/FK4 |
| 5059 | GASKET-FRONT BEARING FLANGE | AM5/601-847 |
| 5062 | GASKET-SHAFT SEAL COVER | F/FK1-2-3,FK20 |
| 5063 | GASKET-SHAFT SEAL COVER | AM/F/FK4+13,F/FK5,O4+5, |
| 5064 | GASKET-FOR SIGHT GLASS ø40 | |
| 5065 | GASKET-FOR SIGHT GLASS ø63 | |
| 5066 | INSULATING COVER F.TERM.BOARD | HG8+88e |
| 5067 | GASKET RING 42X34X1 | F.CONN.PIECE NW 20-32 |
| 5068 | REFRIGERANT RECEIVER 47 LTR. | FLX-47 WITH CONSOLE ANGLE |
| 5069 | REFRIGERANT RECEIVER 85 LTR. | FLS-85 WITH CONSOLE ANGLE |
| 5071 | GASKET-COVER SUCTION SIDE | AM/F/FK 4 |
| 5072 | GASKET-COVER SUCTION SIDE | AM/F/FK 5 |
| 5075 | COUNTERSUNK SCREW M10X25 | DIN 7991 10.9 GEOMET |
| 5076 | GASKET-COVER PLATE | AM0,AM/AMW/F/FK1-2 |
| 5077 | GASKET-COVER PLATE | AM/F/FK3-5+13,AMW3 |
| 5081 | GASKET-VALVE FLANGE | AM0-2,AMW/F/FK1-2,FK30/235 |
| 5082 | GASKET-VALVE FLANGE | AM/AMW/F/FK3,FK30,HH3+34P,K6 |
| 5083 | GASKET-VALVE FLANGE | AM/F/FK3-5+13,HA/HG/O4+5,HH3+6 |
| 5091 | COUNTERSUNK SCREW M10X35 | DIN 7991 8.8 GALVANIZED |
| 5093 | GASKET-FRONT BEARING FLANGE | F14/1165+1365,16/1750+2050, F6 |
| 5094 | GASKET-F.OIL P.+REAR BEAR.FL. | FK24+26+40+50,F6,HA/HG/O4+5, |
| 5095 | GASKET-SHAFT SEAL COVER | AM5/601-724-847 |
| 5096 | GASKET-FOR NON-RETURN VALVE | F6 |
| 5097 | GASKET RING 70X54X1,0 | F6+14+16,HA+HG+O4/650,FK24/650 |
| 5099 | GASKET-FOR DISC | F6 |
| 5100 | GASKET-BASE PLATE | F6,F14,F16,HA+HG+O5,HA+HG6,HG7 |
| 5111 | GASKET RING 81,5X60X1 | F6+14+16+18,HH6+7+8+88e |
| 5112 | GASKET RING 75X61X1,0 | F.CONN.PIECE NW 50 |
| 5113 | GASKET RING 52X38X1,0 | F.CONN.PIECE NW 32-38 |
| 5114 | GASKET ELECTRIC CONNECTION | AM-AMW1-2-3 |
| 5115 | GASKET ELECTRIC CONNECTION | AM4 |
| 5117 | GASKET ELECTRIC CONNECTION | AM5 |
| 5118 | FELT STRIP 300X45X10 | SELF-ADHESIVE AM4+5+13 |
| 5119 | GASKET-VALVE FLANGE | DAM5-NW 54 |
| 5122 | INSULATING HOSE F.EL.CONNECT. | ø6X0,5X50 AM5 |
| 5123 | INSULATING HOSE F.EL.CONNECT. | ø4X0,5X35 AM0-4 |
| 5125 | BEARING BUSH-DU | F6 COVER PLATE |
| 5128 | FELT STRIP 200X30X5 | SELF-ADHESIVE, TM434 MIXED |
| 5129 | PRESS-IN BEARING BUSH | AM0-2,AM5/847, AM5/847S NH3 |
| 5132 | SEAL RING 22x18x0,5 | SIGHT GLASS, RECEIVER |
| 5133 | O-RING ø17,12X2,62 | FOR SIGHT GLASS RECEIVER |
| 5142 | O-RING ø23,52X1,78 | FOR SIGHT GLASS 06026 |
| 5143 | DISC ø30X16X2,0 | CR84+87,SU81+83,SU/CR 92 |
| 5149 | O-RING ø140X2 | FZ/F6 |
| 5150 | O-RING ø37,77X2,62 GREEN | CR84 AM/F/FK4, SU81 AM/F/FK4+5 |
| 5153 | O-RING ø34,59X2,62 | FOR SIGHT GLASS ø40 MM |
| 5155 | O-RING ø58,42X2,62 | FOR SIGHT GLASS ø63 MM |
| 5167 | O-RING ø91,67X3,53 | FOR COVER PLATE F6 |
| 5169 | O-RING ø101,19X3,53 | FRONT BEARING FLANGE FK40+50 |
| 5170 | INSULATING HOSE ø35X14 | ARMAFLEX H35 |
| 5176 | HEX.HEAD SCREW M10X20 | DIN 933 8.8 GALV. |
| 5193 | LOCK WASHER S M6 - A2 | SCHNORR |
| 5200 | PRESSURE SPRING-OIL PRESSURE | F6+14+16 |
| 5205 | GASKET-UPPER VALVE PLATE | FX3*AZ20*FRIGOB.GROSSK.*ÖLP.F4 |
| 5216 | SOLDERED BUSH ø2 5/8" + ø64 | SHUT OFF VALVE 07144,HG7 |
| 5228 | SQUARE FLANGE (NS60) | SHUT-OFF VALVE NW 60 (07144) |
| 5234 | CONNECTING ROD SCREW M8X45 | AM/F/FK5+13,HA/HG5+6,O5,HG7 |
| 5251 | REFFLEX-HOSE LINE,DN 2MM | CONSISTING OF 50246 + GASKETS |
| 5252 | REFFLEX HOSE LINE,DN 2MM | CONSISTING OF 50247 + GASKETS |
| 5253 | REFFLEX HOSE LINE,DN 2MM | CONSISTING OF 50248 + GASKETS |
| 5273 | SOLDERED BUSH ø3 1/8 + ø76 | SHUT-OFF VALVE 06982, HG8 |
| 5279 | REFFLEX HOSE LINE,DN 2MM | CONSISTING OF 50249 + GASKETS |
| 5280 | TOLERANCE RING F.BEARING ø90 | FK20+30+40+50 |
| 5281 | CIRCLIP 110x4 DIN 472 | |
| 5294 | GAS COMPENSATION | HG8+88e |
| 5295 | SEAL RING 17,3x14,5x1,3 | ROTALOCKVALVE UNF 5/8"+3/4" |
| 5296 | SQUARE FLANGE (NS80) | SHUT-OFF VALVE NW 80 (06982) |
| 5301 | SLEEVE PRESSURE BALANCE | AM0-3,F/FK1-2,F3 |
| 5313 | SOLDERED BUSH ø35 | SHUT-OFF VALVE |
| 5319 | GASKET-LOWER VALVE PLATE ø55 | HA+HG22P/190,HA+HG34P/380 |
| 5327 | SET GEAR WHEEL OIL PUMP | AM0/AM/AMW/F/FK 1+2+3 |
| 5328 | SET GEAR WHEEL OIL PUMP | AM/F/FK4+5+13 |
| 5330 | PUMP PLATE OIL PUMP,CPL. | AM0,AM/AMW/F/FK1-2-3 |
| 5336 | GASKET-LOWER VALVE PLATE ø50 | HA+HG22P/160,HA+HG34P/315 |
| 5337 | GASKET-LOWER VALVE PLATE ø45 | HA+HG34P/255,HA+HG22P/125, |
| 5342 | SEAL RING 27x22x2 | DIN 7603-AL-D,CROWNED,ANNEALED |
| 5344 | GASKET-LOWER VALVE PLATE ø41,5 | HA+HG34P/215 |
| 5345 | SEAL RING 16x10x1 | DIN 7603 |
| 5350 | SPACING RING ø50Xø35X6,95 | BALL BEARING AM/FK4 |
| 5361 | SIGHT GLASS-INSERT ø22 | HH12P+22P+34P, HGX12+22P CO2, |
| 5363 | SEAL RING 21x17x1,5 | PLUG OIL DRAIN AM/F/FK2 |
| 5364 | SEAL RING 14,3x11,1x1,5 | RECEIVER VALVE UNF 5/8" |
| 5366 | FIXING PIN | F.DESCR.PLATE/CLAMP |
| 5368 | SEAL RING 31x26x2 | DIN 7603-A |
| 5369 | SEAL RING 19,1x15,8x1,5 | RECEIV.SHUT-OFF VALVE UNF3/4" |
| 5371 | BEARING BUSH ø39Xø35X25 | 3525 P10 HA/HG22P+34P |
| 5372 | BEARING BUSH ø28Xø25X15 | F1+2,F2+AM2/121S NH3,HH12P, |
| 5376 | COMPRESSION RING PISTON 32 | ISO 6622/1-R-32x2,0-MC12/PO |
| 5377 | COMPRESSION RING PISTON 40 | ISO 6622/1-R-40x2,5-MC12/PO |
| 5378 | TAPERED COMPR.RING PISTON 45 | ISO 6621/1-M2-45x2,5-MC12/PO |
| 5379 | TAPERED COMPR.RING PISTON 50 | ISO 6621/1-M2-50x2,5-MC12/PO, |
| 5380 | TAPERED COMPR.RING PISTON 55 | ISO 6621/1-M2-55x2,5-MC12/PO |
| 5381 | TAPERED COMPR.RING PISTON 70 | ISO 6621/1-M2-70x2,5-MC12/PO |
| 5386 | OIL SCRAPER RING PISTON 32 | ISO 6621-N-32x2,0-MC12/PO |
| 5387 | OIL SCRAPER RING PISTON 40 | ISO 6621-N-40x2,5-MC12/PO |
| 5388 | OIL SCRAPER RING PISTON 45 | ISO 6621-N-45x2,5-MC12/PO |
| 5389 | OIL SCRAPER RING PISTON 50 | ISO 6621-N-50x2,5-MC12/PO |
| 5390 | OIL SCRAPER RING PISTON 55 | ISO 6621-N-55x2,5-MC12/PO |
| 5391 | OIL SCRAPER RING PISTON 70 | ISO 6621-N-70x2,5-MC12/PO |
| 5392 | EARTHING ANGLE FOR M8 | EL.CONNECTION AM5/601S-724-847 |
| 5393 | BRIDGE ELECTRIC CONNECTION | TYP KLV 103 |
| 5394 | TERMINAL BOARD | AM5/601 |
| 5396 | HEX.HEAD SCREW M18X70 | DIN 933 8.8 GALV.YE.CHR. |
| 5397 | EARTHING ANGLE FOR M4 | EL.CONNECTION AMO-4 |
| 5398 | BRIDGE ELECTRIC CONNECTION | AM0+1+2+3+4 |
| 5400 | TERMINAL BOARD | AM0+1+2+3+4 |
| 5401 | HEX.HEAD SCREW M5X20 | DIN 933 10.9 BLACK |
| 5402 | HEX.HEAD SCREW M6X16 | DIN 933 10.9 GALV. |
| 5404 | HEX.HEAD SCREW M6X20 | DIN 933 10.9 GALV. |
| 5405 | HEX.HEAD SCREW M6X25 | DIN 933 10.9 GALV. |
| 5407 | HEX.HEAD SCREW M6X30 | DIN 931 10.9 GALV. |
| 5410 | HEX.HEAD SCREW M6X50 | DIN 931 10.9 BLACK |
| 5415 | HEX.HEAD SCREW M16X50 | DIN 933 8.8 GALV. |
| 5417 | HEX.HEAD SCREW M8X75 | DIN 931 8.8 GALV. |
| 5418 | HEX.HEAD SCREW M8X16 - A2 | DIN 933 |
| 5420 | HEX.HEAD SCREW M8X22 | DIN 933 10.9 GALV. |
| 5421 | HEX.HEAD SCREW M8X25 | DIN 933 10.9 GALV. |
| 5424 | HEX.HEAD SCREW M8X35 | DIN 931 10.9 GALV. |
| 5426 | HEX.HEAD SCREW M8X40 | DIN 931 10.9 GALV. |
| 5431 | HEX.HEAD SCREW M8X55 | DIN 931 10.9 GALV. |
| 5432 | HEX.HEAD SCREW M8X60 | DIN 931 10.9 GALV. |
| 5435 | HEX.HEAD SCREW M8X80 | DIN 931 8.8 BLACK |
| 5437 | HEX.HEAD SCREW M8X100 | DIN 931 8.8 BLACK |
| 5439 | HEX.HEAD SCREW M8X70 | DIN 931 10.9 GALV. |
| 5444 | HEX.HEAD SCREW M10X16 | DIN 933 8.8 GALV. |
| 5445 | HEX.HEAD SCREW M10X25 | DIN 933 8.8 GALV. |
| 5447 | HEX.HEAD SCREW M10X35 | DIN 933 10.9 GEOMET |
| 5448 | HEX.HEAD SCREW M10X40 | DIN 931 10.9 GALV. |
| 5450 | HEX.HEAD SCREW M10X45 | DIN 931 8.8 GALV. |
| 5455 | HEX.HEAD SCREW M10X110 | DIN 931 10.9 GEOMET |
| 5457 | HEX.HEAD SCREW M10X70 | DIN 931 10.9 GEOMET |
| 5458 | HEX.HEAD SCREW M10X50 | DIN 931 10.9 GALV. |
| 5459 | HEX.HEAD SCREW M10X110 | DIN 931 10.9 GEOMET |
| 5461 | SAFETY SCREW M12X30 | TENSILOCK GALV. |
| 5462 | HEX.HEAD SCREW M12X40 | DIN 933 8.8 GALV. |
| 5463 | HEX.HEAD SCREW M12X50 | DIN 931 8.8 GALV. |
| 5464 | HEX.HEAD SCREW M12X60 | DIN 931 8.8 GALV. |
| 5465 | HEX.HEAD SCREW M12X65/PREC. | DIN 931 8.8 GALV. |
| 5466 | HEX.HEAD SCREW M12X75 | DIN 931 8.8 GALV. |
| 5467 | HEX.HEAD SCREW M12X80 | DIN 931 10.9 GALV. |
| 5468 | HEX.HEAD SCREW M10X130 | DIN 931 10.9 GALV. |
| 5469 | HEX.HEAD SCREW M12X110 | DIN 931 8.8 GALV. |
| 5471 | LOCKING SCREW 3/8"NPTF | |
| 5472 | CYLINDER HEAD SCREW M10X30 | DIN 912 10.9 GALV. |
| 5476 | CYLINDER HEAD SCREW M5X20 | DIN 912 10.9 GALV. |
| 5477 | CYLINDER HEAD SCREW M6X16 | DIN 912 10.9 GALV. |
| 5484 | CYLINDER HEAD SCREW M8X40 | DIN 912 10.9 GALV. |
| 5488 | CYLINDER HEAD SCREW M10X120 | DIN 912 8.8 |
| 5491 | CYLINDER HEAD SCREW M10X80 | DIN 912 8.8 |
| 5492 | CYLINDER HEAD SCREW M10X75 | DIN 912 10.9 BLACK |
| 5494 | CYLINDER HEAD SCREW M10X70 | DIN 912 8.8 |
| 5501 | THREADED PIN M8x20 ADH.COVER | DIN EN ISO 4028 |
| 5504 | STUD SCREW M4X75 | EL. CONN. AM4 |
| 5506 | STUD SCREW M8X55 | DIN 939 5.8 BARE |
| 5507 | CYLINDER HEAD SCREW M10X20 -A2 | DIN 912 |
| 5511 | THREADED PIN M6X5 | DIN EN ISO 4026 |
| 5512 | CYLINDER HEAD SCREW M3X5 | DIN 912 8.8 GALVANIZED |
| 5514 | LOCKING SCREW 1/8"NPTF | |
| 5515 | LOCKING SCREW R 3/8" | DIN 910 AM/F/FK2-OIL DRAIN |
| 5516 | CONNECTING ROD SCREW M6X30 | AM/F/FK3+4 |
| 5517 | CYLINDER HEAD SCREW M6X12 | DIN 84 |
| 5519 | FILLISTER HEAD SCREW M5X15 | DIN 7985 4.8 GALV. |
| 5520 | FILLISTER HEAD SCREW M4X10 | DIN 7985 4.8 CROSS-SLOT GALV. |
| 5521 | CYLINDER HEAD SCREW M3X14 | DIN 84 4.8 GALV. |
| 5522 | HEX.-SH.MET.SCREW C6,3X16 - A2 | DIN 7976 |
| 5526 | LOCKING SCREW R 1/2" | DIN 906 DRAIN 20-25µm |
| 5528 | UNION NUT 7/16"UNF | ø6,5 (FOR PIPE-ø 1/4") |
| 5529 | UNION NUT 5/8"UNF | ø6,3 |
| 5530 | UNION NUT 5/8"UNF | ø8,3 |
| 5531 | UNION NUT 5/8"UNF | ø10,3 (FOR PIPE-ø 3/8") |
| 5532 | UNION NUT 3/4"UNF | ø10,3 |
| 5533 | UNION NUT 3/4"UNF | ø12,3 |
| 5534 | UNION NUT 7/8"UNF | ø12,3 |
| 5537 | UNION NUT 3/4"UNF | ø12,9 (FOR PIPE-ø1/2") |
| 5539 | HEX.HEAD SCREW M10X30 | DIN 933 10.9 GEOMET |
| 5540 | SCREW-IN FITTING DIN 8906 | UNF7/16" X NPTF1/8" |
| 5541 | SCREW-IN ANGLE PIECE DIN 8906 | UNF7/16" X NPTF1/8" |
| 5542 | T-PIECE - 1/8"NPTF | OUTLETS: UNF7/16" X UNF7/16", |
| 5545 | SEALING CAP 7/16"UNF | HANSA-Nr. 617005, DIN 8914 B |
| 5546 | DISC B6,4 - A2 | DIN EN ISO 7090-6-A2 |
| 5547 | SEALING CAP 5/8"UNF | HANSA-NR. 617009, DIN 8914 B |
| 5548 | SEALING CAP 3/4"UNF | |
| 5549 | SEALING CAP 7/8"UNF | HANSA-NR. 617013, DIN 8914 B |
| 5550 | CIRCLIP 85X3 DIN 472 | |
| 5551 | CIRCLIP 15X1 DIN 472 | MAGAZINED |
| 5554 | CIRCLIP 25X1,2 DIN 471 | |
| 5557 | CIRCLIP 72X2,5 DIN 472 | |
| 5562 | THREADED PIN M8X10/PREC. | DIN EN ISO 4029 |
| 5563 | CIRCLIP 50X2 DIN 471 | |
| 5565 | STEEL BALL ø5,56 | DIN 5401 G28 |
| 5566 | STEEL BALL ø9 | DIN 5401 G28 |
| 5569 | CIRCLIP 20X1 DIN 472 | |
| 5570 | CIRCLIP 35X1,5 DIN 471 | |
| 5571 | T-PIPE UNION 15-12/LL8 | DIN 2353, HG8 |
| 5601 | T-PIECE - 1/8"NPTF | OUTLETS: UNF7/16" X UNF7/16", |
| 5607 | GROUND LABEL | AMO-4 |
| 5608 | STUD SCREW M6X88 | EL.CONN. AM5 |
| 5616 | PROTECT.PLUG ø12,5 | TYPE TL 8-125 |
| 5617 | PROTECT.PLUG ø16,5 | TYPE TL 8-165 |
| 5618 | PROTECT.PLUG ø22,5 (d=ø20,0) | TYPE TL 4-225 |
| 5619 | PROTECT.PLUG ø28,8 (d=ø25,8) | TYPE TL 4-288 |
| 5620 | PROTECT.PLUG ø35,5 (d=ø32,5) | TYPE TL 4-355 |
| 5621 | VALVE PLATE CPL. ø34/38 | HH12P/60+75,HGX12P CO2 |
| 5622 | VALVE PLATE CPL. ø41,5/45 | HA+HG12P/90+110 |
| 5625 | HEX.HEAD NUT M6 (MS) | DIN 934 |
| 5627 | HEX.HEAD NUT M5 (MS) | DIN 934 |
| 5628 | HEX.HEAD NUT M6 | DIN 934 GALVANIZED |
| 5629 | HEX.HEAD NUT M8 - A2 | DIN 934-M8-A2 |
| 5630 | HEX.HEAD NUT M10 | DIN 934 GALVANIZED |
| 5631 | HEX.HEAD NUT M12 | DIN 934 GALVANIZED |
| 5633 | HEX.HEAD NUT M16 | DIN 934 GALVANIZED |
| 5634 | SLOTTED ROUND NUT M6 | DIN 546 EL.CONNECTION AM5 |
| 5635 | SLOTTED ROUND NUT M4 | DIN 546 EL.CONNECTION AM0-4 |
| 5638 | CAGE NUT M5 | SMG GALVANIZED |
| 5639 | CAGE NUT M6 | SMG GALVANIZED |
| 5644 | DISC A8,4 | DIN EN ISO 7090-8-GALV. |
| 5645 | GASKET-LOWER VALVE PLATE ø80 | HG8/3220 |
| 5646 | DISC A10,5 | DIN EN ISO 7090-10-GEOMET |
| 5647 | DISC B13 | DIN EN ISO 7090-12-GALV. |
| 5649 | DISC ø24X8,4X2 | DIN 9021 GALV. |
| 5651 | DISC B4,3 | DIN EN ISO 7090-4-MS |
| 5652 | DISC B5,3 | DIN EN ISO 7090-5-MS |
| 5653 | DISC B6,4 | DIN EN ISO 7090-6-MS |
| 5654 | LOCK WASHER S M8 - A2 | SCHNORR AM5/724,847 |
| 5657 | CAGE NUT M8 | SMG GALVANIZED |
| 5659 | DISC ø25X8,4X3 | GALV. |
| 5660 | SERRATED WASHER A4,3 | DIN 6798 GALV. |
| 5662 | SPRING WASHER B6 | DIN 127 F M6 GALVANIZED |
| 5663 | SPRING WASHER A8 | DIN 127 F M8 GALVANIZED |
| 5664 | SERRATED WASHER A6,4 | DIN 6798 GALV. |
| 5665 | SPRING WASHER B10 | DIN 127 F M10 GALVANIZED |
| 5666 | SPRING WASHER B12 | DIN 127 F M12 GALVANIZED |
| 5670 | WOODRUFF KEY A3X3,7 DIN 6888 | |
| 5671 | WOODRUFF KEY A4X6,5 DIN 6888 | |
| 5672 | WOODRUFF KEY A5X6,5 DIN 6888 | |
| 5673 | WOODRUFF KEY A5X9 DIN 6888 | |
| 5674 | GASKET-LOWER VALVE PLATE ø50 | HA+HG3/190,HA+HG4/385, |
| 5675 | GASKET-LOWER VALVE PLATE ø55 | HG3/235,4/465,HA3/235, |
| 5676 | GASKET-LOWER VALVE PLATE ø60 | HA+HG3/275,HA+HG4/555,O4/555 |
| 5679 | GASKET-LOWER VALVE PLATE ø75 | HG8/2830 |
| 5686 | LOCKING PIN 4X8 | DIN EN ISO 8752(HEAVY VERSION) |
| 5688 | GROOVED PIN 5X14 | DIN 1474 |
| 5689 | CYLINDER PIN 2,5M6x10 | DIN EN ISO 8734 (HARDENED) |
| 5691 | CYLINDER PIN 6M6x15 | DIN EN ISO 8734 (HARDENED) |
| 5693 | GASKET-LOWER VALVE PLATE ø70 | HG8/2470 |
| 5695 | GASKET-LOWER VALVE PLATE ø55 | FK20/120+145 N, FK30/235 N+TK, |
| 5696 | GASKET-LOWER VALVE PLATE ø60 | FK20/170 N, FK30/275 N+TK, |
| 5697 | GASKET-LOWER VALVE PLATE ø65 | N+TK:FK30/325,40/655,50/775 |
| 5700 | CYLINDER ROLLER 13x20 | OIL PUMP AM/F/FK4+5+13 |
| 5708 | THREADED PIN M6X16 | DIN EN ISO 4026 |
| 5710 | GASKET-LOWER VALVE PLATE ø50 | |
| 5717 | CAP NUT 3/4"UNF | SHUT-OFF VALVE UNF 3/4-5/8-7/8 |
| 5719 | LOCKING PIN 5X14 | DIN EN ISO 8752(HEAVY VERSION) |
| 5721 | ADAPTOR M33x2-1 1/4"-12 UNF-2A | EXTERNAL GAS COMPENSATION, HG8 |
| 5724 | SEAL RING 26x20x1,5 | DIN 7603-A,FOR DELTA-P/INT250 |
| 5730 | SEAL DISC 85x60x8 | HG8 |
| 5733 | HOLDER F.ADDITIONAL VENTILATOR | HG8 |
| 5734 | GROUND LABEL M6 | AM5/601-4 |
| 5735 | GROUND LABEL M8 | AM5/724-847 NORM 601-847S |
| 5738 | LOCKING SCREW R 1/2" | DIN 910 FOR RECEIVER |
| 5740 | TERMINAL BOARD | AM5/724+847+601S+724S+847S |
| 5741 | BRIDGE ELECTRIC CONNECTION | AM5/724-847 NORMAL, 601-847S |
| 5748 | SEAL RING 39x20x2 | NON RETURN VALVE F6 |
| 5751 | PUNCHED SHEET F.NON-RETURN VA. | F6 |
| 5752 | T-PIECE WITH SCHRADER CONNECT. | UNF7/16"XNPTF1/8"XUNF7/16" |
| 5753 | HEX.HEAD NUT M4 (MS) | DIN 934 |
| 5755 | HEX.HEAD SCREW M16X110 | DIN 931 8.8 GALV. |
| 5756 | HEX.HEAD SCREW M10X90 | DIN 931 10.9 GEOMET |
| 5758 | FLAT WASHER 11 | DIN 434 GALV. |
| 5763 | STUD SCREW M4X65 | EL.CONN. AM0-3 |
| 5764 | STEEL BALL ø6,35 | DIN 5401 G28 |
| 5765 | HEX.HEAD NUT M8 (MS) | DIN 934 |
| 5766 | DISC B8,4 | DIN EN ISO 7090-8-MS |
| 5767 | CAP NUT M4 | DIN1587 F.TERMINAL BOARD AM0-4 |
| 5768 | CAP NUT M6 | DIN 1587 F.TERMINAL BOARD AM5 |
| 5771 | SPRING WASHER B16 | DIN 127 F.M16 GALVANIZED |
| 5772 | T-PIECE - 1/8"NPTF | OUTLETS: UNF7/16" X UNF7/16", |
| 5776 | HEX.HEAD SCREW M10X60 | DIN 931 10.9 GEOMET |
| 5780 | CABLE SCREW PG11 | DIN 40430, RAL 7035, IP68, |
| 5781 | CABLE SCREW PG21 | DIN 40430, RAL 7035, IP68, |
| 5784 | CAP NUT M22X1,5 | SHUT-OFF VALVE NW 20-32 |
| 5785 | SQUARE FLANGE (NS50) | SHUT-OFF VALVE NS 50 (07131) |
| 5786 | CYLINDER HEAD SCREW M10X15 | DIN 912 8.8 |
| 5787 | SQUARE FLANGE (NS32-38) | SHUT-OFF VALVE NS 32-38 |
| 5788 | RING SCREW M10 | DIN 580 GALVANIZED |
| 5789 | CAP NUT 7/16"UNF | |
| 5791 | SEAL RING 27,8x24,2x2 | SIM.DIN7603-FORM D |
| 5792 | LOCKING SCREW W.MAGNET | F6+14+16 |
| 5793 | PRESSURE SPRING F.OIL STRAINER | F6+14+16 |
| 5794 | ANGLED PIPE SCREW.3/4"-16-12 | ORDER NO.: 616 908,FA.BWB |
| 5796 | CAP NUT M27X2 | SHUT-OFF VALVE NW 32-40 |
| 5797 | CAP NUT M36X1,5 | SHUT-OFF VALVE NW 50 |
| 5798 | SOLDERED BUSH ø54 | SHUT-OFF-VALVE 07131,F6+14+16 |
| 5799 | SOLDERED BUSH ø35 | SHUT-OFF-VALVE F6 |
| 5800 | SCREW-IN FITTING DIN 8906 | UNF7/16" X NPTF1/4" |
| 5801 | LOCKING SCREW 1/4"NPTF | |
| 5803 | SOLDERED ADAP.STRAIG.1 1/4"X22 | SHUT-OFF-VALVE NOBIS |
| 5804 | SOLDERED ADAP.STRAIG.1 1/4"X28 | AM-F-FK3 SHUT-OFF-VALVE |
| 5807 | SEAL RING 25,4x22,2x1,5(±0,2) | FOR SOLD.CONNECTION |
| 5808 | SEAL RING 20x16x1,5 | SHUT-OFF VALVE NW20-32 |
| 5809 | CAP NUT 3/4"UNF | SHUT-OFF VALVE AM/F/FK3 |
| 5825 | CYLINDER COVER STANDARD | HA/HG12P,HGX12P CO2 |
| 5834 | FLAT WASHER 9 | DIN 434 GALV. |
| 5841 | RADIAL-SHAFT SEAL RING | 40X52X7, MANUFACTURED FR.06757 |
| 5852 | PROTECT.PLUG ø42,0 (d=ø39,2) | TYPE TL 2-231 |
| 5854 | PROTECT.PLUG ø62,0 (d=ø60,0) | TYPE TL 2-240 |
| 5855 | PROTECT.PLUG ø65,5 (d=ø62,0) | TYPE TL 2-242 |
| 5869 | CYLINDER HEAD SCREW M10X25 | DIN EN ISO 14580 8.8 GEOMET |
| 5880 | SPRING WASHER B20 | DIN 127 F.M20 GALVANIZED |
| 5882 | RUBBER-BONDED METAL ø20X16,5 | BONNET FIXING AM4+5+13 |
| 5883 | WOODRUFF KEY A10X16 DIN 6888 | |
| 5885 | KNURLED NUT M15X1 WITH O-RING | CR84+87,SU81+83,CR92+SU92, |
| 5916 | BRIDGE FOR TERMINAL BOARD | HG7,AM13 |
| 5919 | CABLE SCREW PG29 | DIN 40430, RAL 7035, IP68, |
| 5920 | CONNECTING ROD SCREW M6X30 | AM0,AM/F/FK1+2,AM/F2NH3 |
| 5937 | LOCK WASHER S M5 | SCHNORR GALV. AM0-4 |
| 5940 | CONNECTING ROD SCREW M8X55 | FZ6,F6+14+16+18,F14+16NH3 |
| 5944 | FASTENING ANGLE | ELIWELL 0031696001 |
| 5951 | SOLDERED SCREWING 16X7/8"UNF | FZ6 |
| 5952 | HEX.HEAD SCREW M10X95 | DIN 931 10.9 BLACK |
| 5953 | HEX.HEAD SCREW M10X140 | DIN 931 10.9 GALV. |
| 5956 | LOCKING SCREW M22X1,5 | W.INT.SCREW THREAD 1/8"NPTF |
| 5958 | CYLINDER HEAD SCREW M3X10 | DIN 84 4.8 GALV. |
| 5959 | CYLINDER HEAD SCREW M3X4 | DIN 920 4.8 GALV. |
| 5968 | RADIAL-SHAFT SEAL RING | 50X62X7, MANUFACTURED FR.50549 |
| 5969 | SCREW-IN FITTING | UNS1"-14 X M22x1,5 HGZ7 |
| 5971 | GASKET-F.PLUG BASE | OIL SUMP.HEATER |
| 5977 | COVERING SHIELD | FK13+FK4*SÜTRAK* |
| 5978 | CIRCLIP 90X3 DIN 472 | |
| 5982 | O-RING ø88,62X1,78 | F14+16,FK26 |
| 5983 | FILTER SUCTION SIDE | F6+14+16,HG5+O5/945,HG6+7 |
| 5984 | LOCKING SCREW M45X1,5 | FOR AL,F14+16 |
| 5985 | LOCKING SCREW M48X1,5 | F.LR,FZ16/2050+F14+16,HA/HG/O4 |
| 5986 | O-RING ø45,69X2,62 GREEN | FOR VALVE BODY AL/LR92 |
| 5987 | O-RING ø48,0X2,5 GREEN | FOR VALVE BODY LR87 |
| 5993 | PISTON PIN ø20X13X66 | DIN 73126,F14+16 STAND.+NH3 |
| 5999 | DISC W.LOCKING PIN | F16 |
| 6001 | SIGHT GLASS ø62 | FOR COMPRESSOR |
| 6004 | GASKET-SHAFT SEAL COVER | F14+16+6 |
| 6005 | RADIAL-SHAFT SEAL RING | 60X75X8,DIN 3760 F16+18 |
| 6009 | SOLDERED BUSH ø42 | F14+16,HA+HG+O5/725+830,FLS115 |
| 6011 | GASKET-UPPER VALVE PLATE | F14/1165+1365,16/1750+2050 |
| 6015 | LOCKING SCREW 1/8"NPTF | ACCORD.DIN 906 W.INTERN.-6HEX |
| 6026 | SIGHT GLASS-INSERT ø18 | FK24+26, |
| 6033 | THERM.PROT.THERM.CPL.1/8"NPTF | POSISTOR,PTC 140°C±5K |
| 6034 | HEX.HEAD SCREW M10X65 | DIN 931 10.9 GEOMET |
| 6043 | LOCK WASHER S M6 | SCHNORR GALV. AM5/601,AMZ13 |
| 6061 | HEX.HEAD SCREW M6X12 - A2 | DIN 933 |
| 6067 | CYLINDER HEAD SCREW M8X25 | DIN 912 10.9 GALV. |
| 6069 | DISC ø28X13X3 | DIN 134 GALV. |
| 6070 | DISC v34X17X3 | DIN 134 GALV. |
| 6071 | DISC ø40X21X4 | DIN 134 GALV. |
| 6073 | HEX.HEAD SCREW M16X80 | DIN 931 8.8 GALV. |
| 6074 | HEX.HEAD SCREW M20X90 | DIN 931 8.8 GALV. |
| 6076 | HEX.-SHEET METAL SCREW C4,8X13 | DIN 7976 GALV. |
| 6080 | HEX.HEAD SCREW M10X30 | DIN 933 10.9 GALV. |
| 6081 | LIQUID-SUBCOOLER CB30-20H | (Q17,Q17)F1 T1,CETETHERM CO. |
| 6082 | SIGHT GLASS ø60 | FUSITE, ORDER-NO.104 8000 |
| 6083 | LOCKING SCREW M24X1,5 | DIN 906,TAP.THR.GALV. |
| 6084 | HEX.HEAD SCREW M12X35 | DIN 933 10.9 GALV. |
| 6085 | GASKET-FRONT BEARING FLANGE | FK30 |
| 6086 | GASKET-SHAFT SEAL COVER | FK30 |
| 6089 | CLAMPING RING | FK30 |
| 6092 | ROTOR 22KW/25KW/29KW | HG7/1620,HGZ7/1620+1860+2110 |
| 6093 | ROTOR 33KW | HG7/1620S+1860 |
| 6094 | ROTOR 37KW | HG7/1860S+2110 |
| 6095 | ROTOR 44KW | HG7/2110S,HG76e/2110S+2500S |
| 6096 | STATOR 29KW D/SSS | 380-420V 50HZ (440-480V 60HZ) |
| 6097 | STATOR 33KW D/SSS | 380-420V 50HZ (440-480V 60HZ) |
| 6098 | STATOR 37KW D/SSS | 380-420V 50HZ (440-480V 60HZ) |
| 6099 | STATOR 44KW D/SSS | 380-420V 50HZ (440-480V 60HZ) |
| 6104 | SEAL RING 7/16" | DIN 8914-C |
| 6106 | PIPE CLAMP 33-37 MM (1") | ORDER NO.:108113, FA.SIKLA |
| 6112 | WELD-FITTING ø21,3 | FOR SHUT-OFF VALVE F3+ |
| 6113 | WELD-FITTING ø26,9 | FOR SHUT-OFF VALVE F3+F4+13NH3 |
| 6114 | WELD-FITTING ø33,7 | FOR SHUT-OFF-VALVE F4+5+13NH3 |
| 6117 | WELD-FITTING ø42,4 | FOR SHUT-OFF-VALVE F14+16NH3 |
| 6118 | WELD-FITTING ø54,2 | FOR SHUT-OFF VALVE F14+16NH3, |
| 6128 | PIPE UNION ø10 | 10 X NPTF1/4" F3-16, |
| 6129 | LOCKING PLUG ø10 | WITH NBR O-RING |
| 6130 | PIPE UNION ø6 | 6 X NPTF1/8" F3,4,5,14,16, |
| 6131 | T-PIPE UNION ø6 | 6XNPTF1/8"X6 F3-18NH3 |
| 6132 | LOCKING PLUG ø6 | WITH NBR O-RING |
| 6133 | W-PIPE UNION ø6 | 6 X NPTF1/8" F4+5+14+16 NH3 |
| 6139 | FILLISTER HEAD SCREW M4X8 | DIN 7985 GALV. |
| 6142 | COMPENSATING PLATE 65X60X10 | F.MOTOR,FDK4+5 BLANK |
| 6144 | CAP NUT M22X1,5 | SHUT-OFF VALVE F3-5+13NH3, |
| 6155 | HEX.HEAD SCREW M16X100 | DIN 931 8.8 GALV. |
| 6156 | FASTENING ANGLE | WITH SCREW AND SPRING RING |
| 6157 | PROTECT.PLUG ø20,8 (d=ø18,0) | TYPE TL 2-215 |
| 6158 | PROTECT.PLUG ø24,2 (d=ø21,2) | TYPE TL 2-218 |
| 6159 | PROTECT.PLUG ø32,2 (d=ø29,6) | TYPE TL 4-322 |
| 6161 | GASKET-LOWER VALVE PLATE ø55 | FK26/470+670K,FK40/465+470K, |
| 6162 | GASKET-UPPER VALVE PLATE | FK20+24+26+30+40+50K, |
| 6164 | GASKET-BASE PLATE | FK24+26,HA/HG/O4, HGX4 CO2 |
| 6165 | GASKET-FRONT BEARING FLANGE | FK24+26+40+50 |
| 6166 | BUSHING VALVE SEAT LR87 | AM/F/FK5,F6,FK26 |
| 6168 | CONNECTING ROD SCREW M6X40 | FK24-50,FK4/467,HA+HG+O4 |
| 6169 | CYLINDER HEAD SCREW M10X10 | SIMILAR DIN 7984 8.8 |
| 6170 | LOCKING PIN 4X14 | DIN EN ISO 8752(HEAVY VERSION) |
| 6178 | GASKET-LOWER VALVE PLATE ø50 | FK26/390+555K,FK40/385K, |
| 6179 | GASKET-BEARING | FK26 |
| 6180 | BACK-UP RING | FK24+FK26 |
| 6209 | PIPE CLAMP 19-23 MM (1/2") | ORDER NO.:108089, FA.SIKLA |
| 6216 | RUBBER-BONDED METAL ø30X20 | 55 SH.A,THREAD BOLT+INSERT.M8 |
| 6218 | O-RING ø32,99X2,62 | FLS-14,5,23,35 |
| 6225 | MOTOR PULLEY ø257 | SPB 5 GROOVES,DW=250,DIN 2211, |
| 6226 | MOTOR PULLEY ø287 | SPB 5 GROOVES,DW=280,DIN 2211, |
| 6227 | MOTOR PULLEY ø322 | SPB 5 GROOVES,DW=315,DIN 2211, |
| 6228 | MOTOR PULLEY ø362 | SPB 5 GROOVES,DW=355,DIN 2211, |
| 6233 | DISC ø17X6,4X3 | DIN 7349 GALV. |
| 6234 | T-PIECE WITH SCHRADER CONNECT. | UNF7/16"UNF7/16" INSIDE |
| 6236 | RING SCREW M12 | DIN 580 GALVANIZED |
| 6237 | RING SCREW M16 | DIN 580 GALVANIZED |
| 6244 | HEX.HEAD SCREW M8X30 | DIN 933 10.9 GALV. |
| 6245 | HEX.HEAD SCREW M16X40 | DIN 933 8.8 GALV. |
| 6249 | COUNTERSUNK SCREW M4X8 | DIN 965 4.8 GALV. |
| 6256 | NAME PLATE,PLAIN 35X61 MM | AM0-2,F/FZ/FK, SAM/SDAM0-2,FDK |
| 6257 | NAME PLATE,PLAIN 40X120 MM | AM3-5,HA/HG/O |
| 6258 | BRIDGE ELECTRIC CONNECTION | HH3+12P+22P+34P,HGX12P CO2 |
| 6270 | HEX.HEAD SCREW M10X75 | DIN 931 8.8 GEOMET |
| 6271 | HEX.HEAD SCREW M10X70 | DIN 931 10.9 GALV. |
| 6276 | CYLINDER HEAD SCREW M10X85 | DIN 912 10.9 GALV. |
| 6278 | HEX.HEAD SCREW M10X80 | DIN 931 10.9 GEOMET |
| 6283 | PIPE CLAMP 40-45 MM (1 1/4") | NO. COMM.:108122, FA. SIKLA |
| 6284 | RUBBER-BONDED METAL ø40X30 | 55 SH.A,THREAD BOLT+INSERT.M10 |
| 6285 | RUBBER-BONDED METAL ø50X30 | 55 SH.A,THREAD BOLT+INSERT.M10 |
| 6330 | CYLINDER HEAD SCREW M8X20 | DIN 912 10.9 GALV. |
| 6334 | HEX.HEAD SCREW M8X45 | DIN 931 10.9 GALV. |
| 6338 | HEX.HEAD SCREW M10X85 | DIN 931 10.9 GEOMET |
| 6348 | LOCKING SCREW M22X1,5 | W.INT.SCREW THREAD 1/4"NPTF |
| 6352 | O-RING ø28,30X1,78 | FOR SIGHT GLASS 05361 |
| 6354 | HEX.HEAD SCREW W.FLANGE M6X16 | DIN EN 1665 10.9 GALV. |
| 6361 | TAPERED COMPR.RING PIS.55 CHR. | ISO 6621/1-M2-55x1,5-MC12/CR1F |
| 6362 | OIL SCRAPER RING 55X1,5 | ISO 6621-N-55x1,5-MC12/PO |
| 6363 | DOUBLE BEVEL OIL CONT.RING 55 | |
| 6364 | TAPERED COMPR.RING PIS.70 CHR. | ISO 6621/1-M2-70x2,0-MC12/CR1F |
| 6365 | OIL SCRAPER RING 70X2 | ISO 6621-N-70x2,0-MC12/PO |
| 6366 | DOUBLE BEVEL OIL CONT.RING 70 | ISO 6625-G-70x3-MC12/PO |
| 6367 | TAPERED COMPR.RING PIS.80 CHR. | ISO 6621/1-M2-80x2,0-MC12/CR1F |
| 6368 | OIL SCRAPER RING PISTON 80 | ISO 6621-N-80x2,0-MC12/PO |
| 6369 | DOUBLE BEVEL OIL CONT.RING 80 | ISO 6625-G-80x3-MC12/PO |
| 6374 | RUBBER-BONDED MET.ø40X30 F.EFC | 70 SH.A,THREAD BOLT+INSERT.M10 |
| 6380 | GROUND CABLE | H07V-K,6mm²,YELL.GREEN,L=200mm |
| 6381 | RING SCREW M8 | DIN 580 GALV. |
| 6390 | DISC A4,3 | DIN 9021 GALV. |
| 6391 | HEX.HEAD SCREW M12X35/PREC. | DIN 933 8.8 GALV. |
| 6396 | FELT STRIP 200X25X11 | AM5 |
| 6400 | LOCKING SCREW M22X1,5 | DIN 910 ZINC-PLATED |
| 6407 | PRESSURE SPRING | F16+18 |
| 6410 | OIL FELT,AM4 | |
| 6412 | RUBBER PLATE 60X60X10 | F.ALL UNITS AS OF 14.5L RECEI. |
| 6417 | FRONT BEARING FLANGE | FK26,FK24 |
| 6427 | CYLINDER HEAD SCREW M8X25 | DIN 7984 8.8 GALV. |
| 6480 | PIPE UNION | 1/2"NPTF X 7/8"UNF FZ16 |
| 6484 | GASKET-UPPER VALVE PLATE | F14/1166+1366,F16/1751+2051 |
| 6485 | GASKET-FRONT BEARING FLANGE | F14/1166+1366,F16/1751+2051 |
| 6486 | GASKET-UPPER VALVE PLATE | F14/1166+1366,F16/1751+2051, |
| 6495 | LOCKING SCREW M45X1,5 | F.LR,F14+16 (NEW SERIES), |
| 6519 | HEX.HEAD SCREW M8X10 | DIN 933 8.8 GALV. |
| 6523 | HEX.HEAD SCREW M12X65 | DIN 931 8.8 BLACK |
| 6528 | SEAL RING 18x10x2 | DIN 7603 |
| 6538 | HEX.HEAD SCREW W.FLANGE M8X25 | DIN EN 1665 8.8 GALV. |
| 6550 | SIGHT GLASS W.INDIC. ø12 | FZ6+16 (NEW SERIES) |
| 6554 | GASKET-LOWER VALVE PLATE ø45 | HA+HG+O4/310,HA+HG3/155 |
| 6556 | GASKET-LOWER VALVE PLATE ø65 | HA+HG+O4/650,HA+HG3/325, |
| 6558 | GASKET-FRONT BEARING FLANGE | HA4/HG4 |
| 6559 | GASKET-TERMINAL BOARD | HA/HG4+5+6,HGX4 CO2, HG44e+56e |
| 6560 | GASKET-TERMINAL BOX | HA/HG3+4+5+6, EX-HG4+5+6 |
| 6562 | OIL SCRAPER RING PISTON 60 | ISO 6621-N-60x2,5-MC12/PO |
| 6563 | COMPRESSION RING PISTON 60 | ISO 6621/1-M2-60x2,5-MC12/PO |
| 6564 | COMPRESSION RING PISTON 65 | ISO 6621/1-M2-65x2,5-MC12/PO |
| 6568 | FILTER DRYER ø12 (SOLD.) | LENGTH 152 x ø76 |
| 6570 | BASE PLATE H=24.0 | HA/HG4, HGX4 CO2 |
| 6571 | BASE PLATE H=24.0 | O4 |
| 6572 | OIL SCRAPER RING PISTON 65 | ISO 6621-N-65x2,5-MC12/PO |
| 6573 | ADJUSTING SCREW M10X0,75 | F.OIL PRESS.HA/HG/O4+5+44e+56e |
| 6574 | FILTER SUCTION SIDE | HG4/650,HG+O5/725+830,HA5+6, |
| 6575 | SPACER SLEEVE 7,5+11+15+18,5KW | HA4/555+650,HG4/310+555S+650S, |
| 6576 | SPACER SLEEVE 9KW+26KW | HA4/310,HG4/310S+385+465, |
| 6578 | GASKET-LOWER VALVE PLATE ø80 | F14/1166+1366,F16/1751+2051, |
| 6580 | O-RING ø82,22X2,62 | FOR OILPUMP 07847 |
| 6587 | GASKET-FRONT BEARING FLANGE | O4 |
| 6589 | NON-RETURN DISC | HG4+5+6, HGX4 CO2 |
| 6594 | SEAT RING | HG4+5+6, HGX4 CO2 |
| 6600 | FRONT BEARING FLANGE,PRE-ASSE. | HA4 |
| 6601 | FRONT BEARING FLANGE,PRE-ASSE. | HG4,HGX4 CO2 |
| 6611 | CIRCLIP 12X1 DIN 472 | |
| 6618 | CYLINDER HEAD SCREW M8X45 | DIN 912 VG 10.9 GALV. |
| 6621 | HEX.HEAD SCREW M10X60 | DIN 931 8.8 BLACK |
| 6622 | FILLISTER HEAD SCREW A M6X16-H | DIN 7985 4.8 GALVANIZED |
| 6623 | CYLINDER HEAD SCREW M8X60 | DIN 912 10.9 GALV. |
| 6624 | HEX.HEAD SCREW M8X50 | DIN 931 10.9 GALV. |
| 6625 | CYLINDER HEAD SCREW M6X12 | DIN 912 10.9 GALV. |
| 6626 | HEX.HEAD SCREW M6X10 | DIN 933 10.9 GALV. |
| 6627 | FILLISTER HEAD SCREW M5X20 | DIN 7985 4.8 GALV.+YELL.CHR. |
| 6628 | SEAL DISC 14x5,2x1-A2 | |
| 6630 | DISC ø8,4X17X1,6-PA6 | SIMILAR TO DIN 125 |
| 6632 | CONNECTING CABLE | H05V-K,0.75mm²,BLACK,L=420mm |
| 6633 | HEX. PROTECTION CAP FOR NUT M8 | TYPE GPN 1000/893, BLACK |
| 6634 | PLUG ø9 | FOR TERMINAL BOX |
| 6641 | GASKET-LOWER VALVE PLATE ø60 | FK30/275K,FK40/560K,FK50/660K, |
| 6642 | GASKET-LOWER VALVE PLATE ø65 | FK40/650+655K,30/325K,50/775K, |
| 6643 | CYLINDER HEAD SCREW M12X40 | DIN 912 10.9 GALV. |
| 6644 | CYLINDER HEAD SCREW M10X60 | DIN 912 10.9 GALVANIZED |
| 6651 | PRESSURE SPRING-OIL OV.PRESSU. | HA/HG/O4+5 |
| 6652 | FIXING CLAMP | HA4+5+6 |
| 6653 | O-RING ø238X5 | HA/HG4+5 |
| 6654 | FEATHER KEY A12X8X50 DIN 6885 | HA/HG4+5+6, HG44e+56e |
| 6659 | INSULATING COVER F.TERM.BOARD | HA/HG4+5 |
| 6661 | FRONT BEARING FLANGE,PRE-ASSE. | HG5 |
| 6662 | FRONT BEARING FLANGE,PRE-ASSE. | HA5 |
| 6671 | CAPTIVE-WASHER M5 | W.ONE-SIDED SEAL LIP |
| 6672 | FLYWHEEL ø230 | 4-GROOVES,05 |
| 6681 | SCREW-IN FITTING DIN 8906 | UNF5/8" X NPTF1/4" |
| 6684 | HEX.HEAD SCREW M12X85 | DIN 931 8.8 GALV. |
| 6685 | GASKET-BEARING FL./MOTOR COVER | HA/HG3 |
| 6692 | GASKET-FRONT BEARING FLANGE | HA/HG5 |
| 6694 | VALVE PLATE CPL. ø70/75/80 | HA/HG/O5 |
| 6696 | BASE PLATE H=24.0 | HA/HG5+6,HG7+76e |
| 6699 | FRONT BEARING FLANGE,PRE-ASSE. | HG6 |
| 6701 | FRONT BEARING FLANGE,PRE-ASSE. | HA6 |
| 6702 | GROUND CABLE | H07V-K,4mm²,YELLOWGR.,L=160mm |
| 6708 | SPACER SLEEVE 11KW+22KW+29KW | HG5/725+830,HG6/1080,HG7/1620 |
| 6709 | SPACER SLEEVE 15KW+18,5KW | HA+HG5/725-945+S,HG5/945 |
| 6710 | TAPERED COMPR.RING PIS.75 CHR. | ISO 6621/1-M2+75X2,0-MC12/CR1F |
| 6712 | DOUBLE BEVEL OIL CONT.RING 75 | ISO 6625-G-75X3-MC12/PO |
| 6715 | CLAMPING RING | FK40+50 |
| 6721 | GASKET-BASE PLATE | FK40+50 |
| 6723 | OIL STRAINER | FK30+40+50 N+K,(EX-)HH6,HG7+8 |
| 6724 | GASKET-TERMINAL BOARD | HH3+12P+22P+34P,HGX12P CO2, |
| 6725 | GASKET-PTC FEEDTHROUGH | HA/HG3+12P+22P+34P, |
| 6726 | FRONT BEARING FLANGE | FK40+50 N+K+TK |
| 6727 | TERMINAL BOARD | HH3,HH12P+22P+34P |
| 6728 | FEEDTHROUGH F. PTC | HA/HG3+12P+22P+34P, |
| 6730 | GASKET-UPPER VALVE PLATE | FK24+26+30+40+50N,HA/HG3+4,O4 |
| 6734 | SPACER SLEEVE 2,2+3+4KW | HA/HG3,HA+HG34P/215+255 |
| 6747 | TERMINAL BOARD | HA/HG4+5+6 (TYPE-EXAM.TESTED) |
| 6748 | COUPLING PROTECTION | FDK4+5 |
| 6749 | COUPLING PROTECTION | FDK6+14 |
| 6750 | COUPLING PROTECTION | FDK16/11-30KW |
| 6757 | RADIAL-SHAFT SEAL RING | 40X52X7,DIN 3760A FK40+50 |
| 6758 | SPACING ROLLER ø12X10 | HA3 |
| 6759 | AIR GUIDE PLATE | HA3 |
| 6760 | GASKET-LOWER VALVE PLATE ø70 | O5/725,HA+HG6/1080,HG7/1620, |
| 6761 | GASKET-LOWER VALVE PLATE ø75 | O5/830,HA+HG6/1240,HG7/1860, |
| 6762 | DISC ø5,3x25x1,25 | FENDER DISK |
| 6763 | HEX.HEAD SCREW M5x8 | DIN 933 8.8 BLACK |
| 6765 | INTERMEDIATE FLANGE OVAL 46MM | FKX40 *EVOBUS* |
| 6766 | INTERMEDIATE FLANGE OVAL 62MM | FKX40+50 *SPECIAL* |
| 6771 | HEX.HEAD SCREW M10X125 | DIN 931 10.9 GEOMET |
| 6776 | HEX.HEAD SCREW M10X12 | DIN 933 8.8 GALV. |
| 6786 | HEX.HEAD SCREW M8X90 | DIN 931 10.9 GALV. |
| 6794 | INTERMEDIATE FLANGE OVAL 25MM | W.LOCKING SCREW 1/8"NPTF, |
| 6795 | INTERMEDIATE FLANGE OVAL 34MM | FKX40+50 *SPECIAL* |
| 6796 | INTERMEDIATE FLANGE OVAL 15MM | FKX30+40+50 *SPECIAL* |
| 6799 | CYLINDER PIN 2M6x10 | DIN EN ISO 8734 (HARDENED) |
| 6801 | COUPLING PROTECTION | FDK3 |
| 6805 | HOLDER F.ADDITIONAL VENTILATOR | HG4+5+6 |
| 6806 | SEAL DISC 72x50x8 | HA/HG6,HG7 |
| 6809 | SPACING ROLLER ø20X9 | HG4+5+6+44e |
| 6810 | HOLDER F.ADDITIONAL VENTILATOR | HG3 |
| 6817 | TRANSPORT ROLLER ø20X29 | SHA/SHG3,SAM0-4 |
| 6821 | HOLDER F.OIL SEPARATOR | DHA/DHG4 |
| 6828 | HEX.HEAD SCREW M10X75 | DIN 931 10.9 GALV. |
| 6832 | COUPLING PROTECTION | FDK16/37-55KW |
| 6833 | BLANK FLANGE | HA/HG3-6,HGX4 CO2 |
| 6836 | HEX.HEAD SCREW M12X40/PREC. | DIN 933 8.8 GALV. |
| 6837 | HEX.HEAD SCREW M12X50/PREC. | DIN 931 8.8 GALV. |
| 6839 | GASKET-COVER TERMINAL BOX | HA/HG6 (230/400V D/S 50/60HZ) |
| 6842 | DK-MOTOR 45,0 KW,IP55,225M | 380-420/660-725V D/S,50HZ, |
| 6843 | DK-MOTOR 55,0 KW,IP55,250M | 380-420/660-725V D/S,50HZ, |
| 6845 | HEX.HEAD SCREW M16X140 | DIN 931 8.8 GALV. |
| 6851 | PISTON PIN ø15X10X26 | DIN 73126, HH12P/60 |
| 6854 | THERMOST-EXPANSION VALVE.R404A | TOP HONEYW.TMVL-00108 |
| 6855 | PISTON PIN ø15X10X30 | DIN 73126, HH12P/75, |
| 6856 | THERMOST.EXPANSION VALVE R22 | TOP HONEYW.TMVL-00101 |
| 6857 | THERMOST.EXPANSION VALVE R410A | TLEX 00272-3,5-R410A-MOP+15°C |
| 6863 | SEAL RING 14x8x1 | DIN 7603-A |
| 6864 | TERMINAL BOARD | HG7+76e (TYPE-EXAM.TESTED) |
| 6872 | GASKET-TERMINAL BOX | HG7+76e, HGX46 CO2 T |
| 6875 | VENTILATOR MOTOR ø200 | EBM TYP A4S 200-AA02-37 |
| 6876 | GASKET-TERMINAL BOARD | HG7+76e |
| 6877 | MOTOR FOOT | HG7+76e |
| 6878 | GASKET-REAR BEARING FLANGE | HG7+76e |
| 6879 | FEATHER KEY A9,56X8X60 DIN6885 | HG7 |
| 6880 | FEATHER KEY A4,63X5X70 | HG7 |
| 6882 | HEX.HEAD SCREW M10X170 | DIN 931 10.9 BLACK |
| 6883 | O-RING ø278,77X5,33 | FOR COVER SUCTION SIDE HG7 |
| 6890 | HOLDER F.ADDITIONAL VENTILATOR | HG7,F16 |
| 6895 | STATOR 29KW D/S | 230/400V 60HZ |
| 6896 | STATOR 33KW D/S | 230/400V 60HZ |
| 6897 | STATOR 37KW D/S | 230/400V 60HZ |
| 6898 | STATOR 44KW D/S | 230/400V 60HZ |
| 6907 | WELD-FITTING ø60,4 | F.SHUT-OFF VALVE HG7 |
| 6912 | CYLINDER HEAD SCREW M8X25 | DIN 912 12.9 BLACK |
| 6913 | MOTOR PROT.MP10,AC 230V ±10% | AS ELECTRONICS,O/NO.50071 002 |
| 6914 | MOTOR PROT.MP10,DC 24V ±20% | AS ELECTRONICS,O.NO.50071 003 |
| 6916 | STATOR 25KW D/SSS | 380-420V 50HZ (440-480V 60HZ) |
| 6918 | FEATHER KEY A5X5X60 DIN 6885 | (MOTOR HOUSING HH4-6) |
| 6920 | TAPP.SCREW W.COUNT.HEADC3.5X13 | DIN 7982, INSERT GALV.GALV. |
| 6926 | VALVE PLATE HP-STAGE CPL. | HGZ7/1620+1860+2110-ø70/75/80 |
| 6942 | VALVE PLATE LP-ST.W.VALVE+GAS. | HGZ7/1620+1860+2110-DM70/75/80 |
| 6945 | BASE PLATE SNAP-ON MOUNTING | MP10+BCM2000: ASSEMBLY ON RAIL |
| 6947 | OIL TEMP.SENSOR CPL.1/8"NPTF | KTY 84-130,NTC SCREW-IN SENSOR |
| 6951 | OIL PUMP COMPLETE | HA/HG4+5,F14+16,FK26,HGX4 CO2 |
| 6959 | FEATHER KEY A3X3X6 DIN 6885 | FK20,HA/HG12P+22P+34P |
| 6964 | BASE PLATE H=35.0 | HG8+88e |
| 6965 | GASKET-BASE PLATE | HG8+88e |
| 6966 | SWINGING SCREW CONNECTION | ROW PB 100,Messrs. BELL |
| 6967 | PIPE UNION | HG8 |
| 6969 | GASKET-REAR BEARING FLANGE | HG8+88e,F18 |
| 6970 | FEATHER KEY A16X10X70 DIN 6885 | HG8+88e |
| 6971 | DISC ø6,4x12x1,6-PA6 | SIMILAR DIN 125 |
| 6972 | CYLINDER HEAD SCREW M12X110 | DIN 912 10.9 BLACK |
| 6973 | O-RING ø335X5 | HG8+88e |
| 6974 | FINE SCREEN SUCTION SIDE | HG8 |
| 6976 | COUNTERSUNK SCREW M12X45 | DIN 7991 10.9 GALVANIZED |
| 6977 | TERMINAL BOARD | HG8+88e (TYPE-EXAM.TESTED) |
| 6978 | O-RING ø117,07X3,53 | TERMINAL BOARD HG8+88e |
| 6979 | GASKET-TERMINAL BOX | HG8+88e |
| 6980 | BRIDGE FOR TERMINAL BOARD | KLV609, ORDER NO.1251244 |
| 6983 | GASKET RING 105X85X1 | HG8+88e,F18 |
| 6984 | BEARING BUSH ø65Xø60X40 | HG8 |
| 6988 | INTERFACE CABLE F.PC CONNECT. | BCM 2000 |
| 6990 | DELTA-P/INT250 SCREW-IN PART | +CU-RING,3/4"16UNF-2A,0.95BAR |
| 6992 | CD WITH READ-OUT SOFTWARE /1.4 | FOR BCM 2000 |
| 6995 | VALVE PLATE CPL. ø70/75/80 | HG8 |
| 6999 | FEATHER KEY B10X8X80 | HG8+88e |
| 7001 | STATOR 0,37KW TYPE 173,0-6 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7005 | STATOR 0,55KW TYPE 173,5-4 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7006 | GASKET-TERMINAL BOX | (EX-)HA/HG12P+22P+34P |
| 7007 | STATOR 0,75KW TYPE 175,0-4 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7009 | STATOR 1,5KW TYPE 176,5-4 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7010 | STATOR 1,8KW TYPE 177,5-4 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7011 | STATOR 2,2KW TYPE 178,5-4 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7012 | STATOR 3,5KW TYPE 246,5-4 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7015 | STATOR 3KW TYPE 245,5-4 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7016 | STATOR 3KW TYPE 245,5-4 D | 380-420V 50HZ (440-480V 60HZ) |
| 7017 | STATOR 4KW TYPE 247,0-4 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7018 | STATOR 4KW TYPE 247,0-4 D | 380-420V 50HZ (440-480V 60HZ) |
| 7019 | STATOR 4KW TYPE 275,5-4 D | 380-420V 50HZ (440-480V 60HZ) |
| 7020 | STATOR 4KW TYPE 275,5-4 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7021 | STATOR 4,7KW TYPE 277,0-4 D | 380-420V 50HZ (440-480V 60HZ) |
| 7022 | STATOR 3,5KW TYPE 246,5-4 D | 380-420V 50HZ (440-480V 60HZ) |
| 7023 | STATOR 4,7KW TYPE 277,0-4 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7024 | STATOR 5,5KW TYPE 278,5-4 D | 380-420V 50HZ (440-480V 60HZ) |
| 7025 | STATOR 6,3KW TYPE 279,5-4 D | 380-420V 50HZ (440-480V 60HZ) |
| 7026 | STATOR 5,5KW TYPE 278,5-4 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7027 | STATOR 7,5KW TYPE 2710,5-4 D | 380-420V 50HZ (440-480V 60HZ) |
| 7028 | STATOR 6,3KW TYPE 279,5-4 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7029 | STATOR 7,5KW TYPE 2710,5-4 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7030 | STATOR 11KW TYPE 2713,5-4 D | 380-420V 50HZ (440-480V 60HZ) |
| 7031 | STATOR 15KW TYPE 2715,5-4 | 380-420V 50HZ (440-480V 60HZ) |
| 7032 | STATOR 18,5KW TYPE 2718,5-4 | 380-420V 50HZ (440-480V 60HZ) |
| 7034 | STATOR TYPE 277,0-8/4 | 380-420V 50HZ (440-480V 60HZ) |
| 7035 | STATOR TYPE 279,5-8/4 | 380-420V 50HZ (440-480V 60HZ) |
| 7036 | STATOR TYPE 2710,5-8/4 | 380-420V 50HZ (440-480V 60HZ) |
| 7041 | STATOR TYPE 2713,5-8/4 | 380-420V 50HZ (440-480V 60HZ) |
| 7042 | STATOR TYPE 2718,5-8/4 | 380-420V 50HZ (440-480V 60HZ) |
| 7073 | HIGH-LOW PRESSURE CONTROL | RANCO 017-H4758 |
| 7076 | AIR GUIDE PLATE | HA22P+34P |
| 7078 | ROTOR 37KW/55KW | HG8/2470+2470S+2830+3220, |
| 7079 | ROTOR 68KW | HG8/2830+3220 S |
| 7080 | STATOR 55KW D/SSS | 380-420V 50HZ (440-480V 60HZ) |
| 7081 | STATOR 68KW D/SSS | 380-420V 50HZ (440-480V 60HZ) |
| 7093 | AIR-COOLED COND. 3RR/14RH/1K | SAM1/45-6LD,SAM1/45LD |
| 7100 | AIR-COOLED COND. 3RR/21RH/3K | FOR FAN ø420 |
| 7102 | AIR-COOLED COND. 5RR/21RH/5K | FOR FAN ø420 |
| 7108 | AIR-COOLED COND. 6RR/18RH/6K | FOR FAN ø350 |
| 7119 | AIR-COOLED COND. 4RR/26RH/7K | FOR FAN ø500 |
| 7123 | SHUT-OFF VALVE | WITHOUT ADAPTER, LOW VERSION |
| 7128 | SHUT-OFF VALVE (AL) | W/O SOLD.BUSH,AM/F/FK4+5+13, |
| 7130 | SHUT-OFF VALVE (AL) | FK50 |
| 7131 | SHUT-OFF VALVE NS50 | W.SOLDER UNION ø54,F6+14+16, |
| 7143 | SAFETY VALVE RECEIVER | LP.28BAR,CONNECTION G1/2"+1" |
| 7149 | VALVE PLATE CPL. ø55 | AM/F/FK3+4 |
| 7155 | SHUT-OFF VALVE ø16/SOLD. | HG12P,HH22P+34P,HGX12P+22P CO2 |
| 7156 | SHUT-OFF VALVE ø22/SOLD. | HA/HG34P, HGX22P CO2 |
| 7175 | AIR-COOLED COND. 4RR/21RH/5K | F.FAN ø420 |
| 7177 | FILLISTER HEAD SCREW M4X20 | DIN 7985 4.8 GALVANIZED |
| 7200 | FAN BLADE ø300 5BL. ECRU | AM0/45-4L,AM1/45-4LN/L |
| 7208 | PISTON PIN ø12X8X25 | DIN 73126, AMO,AMW/AM/F/FK1 |
| 7209 | PISTON PIN ø12X8X32 | DIN 73126, AMW+AM2/58+95 |
| 7210 | PISTON PIN ø12X8X37 | DIN 73126, AMW+AM2/73+121, |
| 7211 | PISTON PIN ø15X10X41 | DIN 73126, FK40/385,FK50/460, |
| 7212 | PISTON PIN ø15X10X46 | DIN 73126, AM3/185+233,F/FK3+4 |
| 7214 | PISTON PIN ø20X13X60 | DIN 73126, AM/F/FK5,F,FZ6 |
| 7225 | HOOD FOR MOTOR COVER | AM0-2 |
| 7229 | FAN BLADE ø300 5BL. YELLOW | F2/90-190LN/L,F2/90-133SL |
| 7231 | FAN BLADE ø400 5BL. YELLOW | F3/140-230 LN-L |
| 7233 | FAN BLADE ø345 5BL. ECRU | AM2/58-121LN/L AM1/45SL |
| 7234 | FAN BLADE ø270 5BL. YELLOW | F1/90-190 LN/L |
| 7235 | FAN BLADE ø420 5BL. ECRU | BASIC SHAPE FOR AM-UNITS |
| 7236 | FAN BLADE ø420 5BL. YELLOW | BASIC SHAPE FOR AM-UNITS |
| 7237 | IMPELLER ø177 | AM0-2 |
| 7238 | IMPELLER ø233 | AM3 |
| 7239 | AIR GUIDE RING ø266 | AM3-AMF 07242 |
| 7240 | HOOD FOR MOTOR COVER | AM0-2 MF |
| 7241 | HOOD | AM0-1-2 |
| 7242 | HOOD | AM3 |
| 7244 | PROTECTION CAGE | AM2 AIR |
| 7245 | PROTECTION CAGE | AM3 AIR |
| 7246 | HOOD | AM4-5, HAX2 CO2T |
| 7247 | HOOD FOR MOTOR COVER | AM3MF |
| 7248 | OIL PRESSURE SAFETY SWITCH | DANFOSS MP55,NR.060B0172 |
| 7253 | GROOVED BALL BEAR.4306-BB-TVH | FK3 MAIN BEARING |
| 7254 | GROOVED BALL BEARING 6306Z | FK3 REAR, AMW3 REAR |
| 7255 | GROOVED BALL BEARING 6205Z | FK1 REAR+FRONT,AMW1-2,FK1 |
| 7256 | GROOVED BALL BEARING 6206-2RS | AMW3 STEP BEARING |
| 7257 | INCLINED BALL BEARING 3207 | DIN 628 T3, AM4/FK4 REAR |
| 7262 | NILOS-RING 6306 AV | FK3 BEARING FRONT |
| 7264 | HOOD FOR MOTOR COVER | HA22P+34P |
| 7269 | STATOR 55KW D/S | 230/400V 60HZ |
| 7270 | STATOR 68KW D/S | 230/400V 60HZ |
| 7285 | TIME RELAY F.START UNLOADER | TESCH E67.3 103 220VAC 1ZW LED |
| 7294 | OIL PRESSURE SAFETY SWITCH | DANFOSS MP54,NO.060B0168 |
| 7298 | NON-RETURN VALVE ø22 | TYPE 3122/M22 (CASTEL) |
| 7299 | NON-RETURN VALVE ø28 | TYPE 3122/M28 (CASTEL) |
| 7300 | NON-RETURN VALVE ø35 | TYPE 3120/11 (CASTEL) |
| 7301 | OIL SEPARATOR OS-1012 | WITH THREADED BOLT M10,SHH12 L |
| 7302 | OIL SEPARATOR OS-16 | WITH THREADED BOLT M10; |
| 7304 | OIL SEPARATOR OS-28F | WITH FOOT,AM/F/FK4+13,HA/HG4 |
| 7305 | OIL SEPARATOR OS-35F | WITH FOOT,AM/F/FK5,FZ6,HA/HG4 |
| 7312 | MAGNETIC FIELD LA21 | FK1-2 |
| 7315 | MAGNETIC FIELD EKP175+200 | EKP 175+200,LA 28.2.2 FK3 |
| 7316 | MAGNETIC FIELD EKP200,LA28.2.2 | 24V- FK3 |
| 7318 | OIL SEPARATOR OS-80/42FS | WITH FOOT,HG7 |
| 7319 | OIL PUMP COMPLETE | HG8 up to 03/2012, |
| 7326 | CYL.ROLLER BEAR.NUP310.ETNG | FK5 |
| 7327 | NILOS-RING NUP 310JV | FK5 |
| 7328 | FULL-WAY VALVE NS6 (W.CAP) | CASTEL 6420/2, EUROC. |
| 7330 | DECOMPRES.VALVE F.15BAR OPER. | M24X1,5LH |
| 7333 | AIR-COOLED COND. 3RR/18RH/3K | FOR FAN ø350 |
| 7334 | AIR-COOLED COND. 4RR/18RH/2K | FOR FAN ø350 |
| 7359 | SELF-ALIG.ROLLER BEA. 22205EJA | FK2,AM5/600-847 |
| 7365 | FLEXIBLE SHAFT COUPL. WK 42.22 | WK42.22 F.DIR.DRIV. F/FK2-3 |
| 7366 | FLEXIBLE SHAFT COUPL. WK 70.40 | WK70.40 F.DIR.DRIV. F/FK4+5+13 |
| 7367 | FLEXIBLE SHAFT COUPL. WK190.50 | WK190.50 F.DIR.DRIV.. F6+14 |
| 7372 | OIL SEPARATOR OS-42FL | WITH FOOT,F6+14,FZ16,HA/HG5+6 |
| 7373 | SHUT-OFF VALVE | LESS ADAPTER,AM/F/FK3,FK30 |
| 7380 | FAN BLADE AD 1135 | ø350 MM 35GR. 4BL |
| 7385 | PROTECTION CAGE | AD 1135 |
| 7390 | OIL PUMP COMPLETE | F6 |
| 7400 | ROTOR 0,37KW TYPE 173,0-6 | AMO/45 |
| 7401 | EL.MAGN.CLUTCH LA30.01 Y | 24V-,FK30 W.NEW BEARING FLANGE |
| 7402 | ROTOR 0,55KW TYPE 173,5-4 | AM1/45 |
| 7403 | ROTOR 0,75KW TYPE 175,0-4 | AM1/45S,AM2/58+58S+73 |
| 7404 | ROTOR 1,5KW TYPE 176,5-4 | AM2/73S+95 |
| 7405 | ROTOR 1,8KW TYPE 177,5-4 | AM2/121 |
| 7406 | ROTOR 2,2KW TYPE 178,5-4 | AM2/95S+121S |
| 7407 | EL.MAGN.CLUTCH LA30.1 | 24V-,FK30 W.OLD BEAR.FLANGE |
| 7409 | ROTOR 3KW TYPE 245,5-4 | AM3/153+153S+185 |
| 7410 | ROTOR 3,5KW TYPE 246,5-4 | AM3/233 |
| 7411 | ROTOR 4KW TYPE 247,0-4 | AM3/185S+233S |
| 7412 | ROTOR 4KW TYPE 275,5-4 | AM4/306 |
| 7413 | ROTOR 4,7KW TYPE 277,0-4 | AM4/306S+370, |
| 7414 | ROTOR 5,5KW TYPE 278,5-4 | AM4/370S |
| 7415 | ROTOR 6,3KW TYPE 279,5-4 | AM4/466, |
| 7416 | ROTOR 7,5KW TYPE 2710,5-4 | AM4/466S, |
| 7420 | ROTOR 7,5KW TYPE 2710,5-4 | AM5/601 |
| 7421 | ROTOR 11KW TYPE 2713,5-4 | AM5/601S+724, |
| 7422 | ROTOR 15KW TYPE 2715,5-4 | AM5/724S+847 |
| 7423 | ROTOR 18,5KW TYPE 2718,5-4 | AM5/847S, |
| 7438 | DK-MOTOR 4,0 KW,IP55,112M | 380-420/660-725V D/S,50HZ, |
| 7439 | DK-MOTOR 5,5 KW,IP55,132S | 380-420/660-725V D/S,50HZ, |
| 7440 | DK-MOTOR 7,5 KW,IP55,132M | 380-420/660-725V D/S,50HZ, |
| 7441 | DK-MOTOR 11,0 KW,IP55,160M | 380-420/660-725V D/S,50HZ, |
| 7442 | DK-MOTOR 15,0 KW,IP55,160L | 380-420/660-725V D/S,50HZ, |
| 7443 | DK-MOTOR 18,5 KW,IP55,180M | 380-420/660-725V D/S,50HZ, |
| 7444 | DK-MOTOR 22,0 KW,IP55,180L | 380-420/660-725V D/S,50HZ, |
| 7445 | DK-MOTOR 30,0 KW,IP55,200L | 380-420/660-725V D/S,50HZ, |
| 7446 | DK-MOTOR 37,0 KW,IP55,225S | 380-420/660-725V D/S,50HZ, |
| 7452 | EL.MAGN.CLUTCH EKP 175(LA28KY) | 24V- FK3 |
| 7454 | EL.MAGN.CLUTCH EKP200(LA28.2Y) | 24V- FK3 |
| 7460 | STATOR 0,37KW TYPE 173,0-6 D | 380-420V 50HZ (440-480V 60HZ) |
| 7461 | STATOR 0,55KW TYPE 173,5-4 D | 380-420V 50HZ (440-480V 60HZ) |
| 7462 | STATOR 0,75KW TYPE 175,0-4 D | 380-420V 50HZ (440-480V 60HZ) |
| 7463 | STATOR 1,5KW TYPE 176,5-4 D | 380-420V 50HZ (440-480V 60HZ) |
| 7464 | STATOR 1,8KW TYPE 177,5-4 D | 380-420V 50HZ (440-480V 60HZ) |
| 7465 | STATOR 2,2KW TYPE 178,5-4 D | 380-420V 50HZ (440-480V 60HZ) |
| 7467 | STATOR 11KW TYPE 2713,5-4 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7468 | STATOR 15KW TYPE 2715,5-4 | 230/400V 50HZ (280/460V 60HZ) |
| 7469 | STATOR 18,5KW TYPE2718,5-4 D/S | 230/400V 50HZ (280/460V 60HZ) |
| 7470 | STATOR 0,37KW TYPE 173,0-6 | SPECIAL VOLGAGE + FREQUENCY |
| 7471 | STATOR 0,55KW TYPE 173,5-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7472 | STATOR 0,75KW TYPE 175,0-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7473 | STATOR 1,5KW TYPE 176,5-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7474 | STATOR 1,8KW TYPE 177,5-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7475 | STATOR 2,2KW TYPE 178,5-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7476 | STATOR 3KW TYPE 245,5-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7477 | STATOR 3,5KW TYPE 246,5-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7478 | STATOR 4KW TYPE 247,0-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7479 | STATOR 4KW TYPE 275,5-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7480 | STATOR 4,7KW TYPE 277,0-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7481 | STATOR 5,5KW TYPE 278,5-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7482 | STATOR 6,3KW TYPE 279,5-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7483 | STATOR 7,5KW TYPE 2710,5-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7484 | STATOR 11KW TYPE 2713,5-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7485 | STATOR 15KW TYPE 2715,5-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7486 | STATOR 18,5KW TYPE 2718,5-4 | SPECIAL VOLTAGE + FREQUENCY |
| 7507 | VALVE BODY SU81-4/5 | AM/F/FK4+5+13 [NOT F.NH3 USE!] |
| 7514 | MEMBRANE-FULL-WAY VALVE NS10 | W.COVER F.SOLD.CONNECTION |
| 7519 | VALVE BODY LR84 | AM/F/FK4+13 [NOT FOR NH3 USE!] |
| 7521 | VIBRATION COMPENSATOR | VIBRAFLEX DN25, SAM3+4,SDAM3 |
| 7522 | VIBRATION COMPENSATOR | VIBRAFLEX DN12, SHGZ7 |
| 7523 | FLOAT SWITCH | RECEIVER 85L+115L |
| 7525 | SOLENOID COIL 12V DC | F.SU81+83,CR84+87,SU/CR92 |
| 7526 | SOLENOID COIL 24V DC | F.DV81+83,CR84+87,DV/CR92 |
| 7527 | SOLENOID COIL 230V AC | F.SU81+83,CR84+87,SU/CR92,CR12 |
| 7528 | SOLENOID COIL SPECIAL VOLTAGE | F.SU81+83,CR84+87,SU/CR92 |
| 7532 | NON-RETURN VALVE ø10 | TYPE 3130/M10 (CASTEL) |
| 7541 | VALVE BODY LR87 | AM/F/FK5,F6,FK24+26+40, |
| 7550 | PRESSURE-+SAFETY-PRES.LIMITER | DANFOSS COND. UNIT F16 |
| 7551 | PRESSURE CONTROL,LOW PRESSURE | RANCO 016-6703 VAM3-5,FDK14+16 |
| 7552 | PRESSURE LIMITER | RANCO 016-6759 DBK-77-11 |
| 7553 | SAFETY PRESSURE LIMITER | RANCO 016-6760 SDBK-77-12 |
| 7555 | VIBRATION COMPENSATOR | VIBRAFLEX DN20, SAM/SDAM3 |
| 7557 | OIL PRES.GAUGE,-1 UP TO 16 BAR | NG 63, R 1/8" NPTF DOWN, |
| 7559 | SHUT-OFF VALVE 1/4"-7/16"UNF | NPTF OIL DRAIN F6+14+16 |
| 7562 | SOLENOID COIL 24V AC | F.SU81+83;CR84+87,SU/CR92 |
| 7595 | THERMAL PROT.THERMOSTAT CPL. | BI-METAL F. |
| 7596 | STATOR 2,1/4KW TYPE 277,0-8/4 | SPECIAL VOLTAGE + FREQUENCY |
| 7597 | STATOR 2,4/4,7KW T. 279,5-8/4 | SPECIAL VOLTAGE + FREQUENCY |
| 7598 | STATOR 3,2/6,3KW T.2710,5-8/4 | SPECIAL VOLTAGE + FREQUENCY |
| 7600 | STATOR 6,3/12,3KW T.2713,5-8/4 | SPECIAL VOLTAGE + FREQUENCY |
| 7601 | STATOR 8/16KW TYPE 2718,5-8/4 | SPECIAL VOLTAGE + FREQUENCY |
| 7614 | VALVE PLATE CPL. ø60/65 | HG4/555+650,FK30/275+325N |
| 7624 | VALVE PLATE CPL. ø50/55 | HG4/385+465,HG3/190+235,FK26N, |
| 7634 | MAGNETIC FIELD 24V- WITH CABLE | FOR VARIOUS LA 16-CLUTCHES, |
| 7650 | CLUTCH PLATE WK70.40 | F/FK4+5+13 |
| 7651 | CLUTCH PLATE WK190.50+60 | FK5,F6,F14+16 |
| 7663 | CLUTCH SIMI.EKP 175 W/O MAG.F. | FIELD,BELT PROFILE SPB FK3 |
| 7667 | HIGH PRES.GAUGE,-1 UP TO 24BAR | DIA.63,1/8"NPTF DOWN |
| 7668 | LOW PRES.GAUGE,-1 UP TO 9 BAR | NG 63, R 1/8" NPTF DOWN, |
| 7670 | FLEXIBLE SHAFT COUPLING | F.DIR.DRIV. F16 |
| 7671 | SHUT-OFF VALVE NS38 | F14/16,HG4/650,HA5,O5/725+830, |
| 7690 | OIL PRESSURE SAFETY SWITCH | DANFOSS MP55A,NO.060B0176 |
| 7691 | SHUT-OFF VALVE NS40 | WITHOUT NOZZLE |
| 7692 | SHUT-OFF VALVE NS50 | WITHOUT NOZZLE |
| 7700 | VALVE PLATE CPL. ø50/55/60/65 | FK20+24+26+30+40+50K |
| 7701 | VALVE PLATE CPL. ø50/55 | HA+04/385+465,3/190+235 |
| 7705 | OIL SEPARATOR OS-22 | WITH THREADED BOLT M10;AM3, |
| 7706 | SHUT-OFF VALVE ø6X1/4"NPTF | OIL DRAIN F6+14+16 NH3 |
| 7720 | CAM RING FOR CLUTCH DA112 | 98 AU 928 BLUE |
| 7742 | CYL.ROLLER BEAR.RNU210.ETNG | WITH LNJ2210EX5.C3 DIN 5412 |
| 7754 | SHUT-OFF VALVE ø16/SOLD. | ROTALOCK 1"-14UNS F.RECEIVER |
| 7765 | INSULATION FOIL F.D/SS | HG4 8/4-POLAR |
| 7766 | INSULATION FOIL F.S/SS | HA/HG4+5+6, HG44e+56e |
| 7767 | INSULATION FOIL F.D/S (SP.V.) | HA/HG4+5+6 |
| 7768 | INSULATION FOIL F.D/SSS | HG7 |
| 7769 | INSULATION FOIL F.D/S (SP.V.) | HG7+76e |
| 7775 | EL.MAGN.CLUTCH LA21 | 24V- FK1-2,FK20 |
| 7776 | EL.MAGN.CLUTCH LA28.3.3 | 24V- FK3 |
| 7777 | EL.MAGN.CLUTCH LA16.028 Y | 24V- FK4/467,FK24+26+40+50 |
| 7785 | STATOR 4KW T.247,0-4 D/S NH3 | 230/400V 50HZ (280/460V 60HZ)* |
| 7786 | STATOR TYPE 2710,5-4 D (NH3) | 380-420V 50HZ (440-480V 60HZ) |
| 7787 | STATOR TYPE 2718,5-4 D (NH3) | 380-420V 50HZ (440-480V 60HZ) |
| 7788 | OIL PUMP COMPLETE | HG7;HH6 AS FROM VERS.018, |
| 7789 | PRESSURE-+SAFETY-PRES.LIMITER | INSTRUMENT PANEL NH3 |
| 7790 | EL.MAGN.CLUTCH LA16.0206 Y | 24V- FK4/467,FK24+26+40+50 |
| 7802 | SOLENOID COIL 24V DC | F.SU F,FK,AM3 |
| 7803 | NON-RETURN VALVE ø12 CPL. | HG3+7,HG22+34 |
| 7804 | EL.MAGN.CLUTCH LA16.0131 Y | 24V FK5 |
| 7844 | VENTILATOR MOTOR ø250 | EBM TYPE A4S 250-AA02-01 |
| 7845 | VALVE PLATE CPL. ø70/75/80 | F14/1166+1366,16/1751+2051 |
| 7848 | VALVE BODY AL/LR92 | AL+LR:;HH5-8,O5; ONLY LR:HH34P |
| 7849 | NON-RETURN VALVE ø16 | TYPE 3130/5 (CASTEL) |
| 7855 | PRESSURE BALANCE VALVE CPL. | HA/HG/O4+5,HA+HG6,HG7,HGX4 CO2 |
| 7856 | PISTON PIN ø15X10X34 | DIN 73126 HA4+HG4+O4/310 |
| 7857 | PISTON PIN ø15X10X50 | DIN 73126, HA+HG+O4/555+650, |
| 7858 | EL.MAGN.CLUTCH LA16.021 Y | 24V- FKX4/467A |
| 7860 | NON-RETURN VALVE ø10 CPL. | HA4 |
| 7861 | NON-RETURN VALVE ø6 | TYPE 3130/2 (CASTEL) |
| 7870 | AIR-COOLED COND. 3RR/21RH/3K | FOR FAN ø420 |
| 7871 | HOOD | HA12P |
| 7872 | PISTONRING PISTON 34 | ERREVIS CTS-P 34x1,5x1,45 |
| 7873 | PISTONRING PISTON 38 | ERREVIS CTS-P 38x1,5x1,6 |
| 7882 | SOLENOID COIL 110V AC | F.SU81+83;CR84+87;SU/CR92 |
| 7886 | PISTONRING PISTON 41,5 | ERREVIS CTS-P 41,5x1,5x1,75 |
| 7887 | PISTON RING PISTON 45 | ERREVIS CTS-P 45x1,5x1,9 |
| 7891 | INTERMEDIATE FLANGE OVAL 23MM | F.THERMAL PROT.THERMOSTAT,HH12 |
| 7897 | GASKET-LOWER VALVE PLATE ø70 | HA+HG5/725,HGZ7/1620,FZ16/1570 |
| 7898 | GASKET-LOWER VALVE PLATE ø75 | HA+HG5/830,HGZ7/1860,FZ16/1800 |
| 7899 | GASKET-LOWER VALVE PLATE ø80 | NH3:F14/1166+1366,16/1751+2051 |
| 7908 | HOOD | HA3+22P+34P |
| 7912 | VALVE PLATE CPL. ø45 | HA+HG+O4/310,HA+HG3/155 |
| 7913 | VALVE PLATE CPL. ø60/65 | HA+O4/555+650,HA3/275+325 |
| 7921 | ROTOR 15KW | HA4/555+650,HG4/555S+650S, |
| 7922 | ROTOR 18,5KW | HA5/830+945,HG5/830S+945S, |
| 7923 | AIR GUIDING-HOOD | HA4+5 |
| 7924 | VENTILATOR MOTOR ø300 W.CAPAC. | EBM TYP A2E 300-AC47-06 |
| 7927 | ROTOR 7,5KW | HG4/310 |
| 7928 | ROTOR 9KW | HG4/310,HG4/310S+385+465, |
| 7933 | SHEET METAL FOR MOTOR COVER | HA12P |
| 7936 | VALVE PLATE NH3 CPL. ø55 | AM3/233NH3,AM4/466NH3,F3+4NH3 |
| 7938 | VALVE PLATE NH3 CPL. ø80 | F14+16 NH3 (NEW SERIES) |
| 7940 | DECOMPRESSION VALVE M24X1,5 | F4-18,FK4+24+26+30+40+50 |
| 7942 | SHUT-OFF VALVE ø12/SOLD. | F/FK1, AM0-1, AM2/58 |
| 7943 | SHUT-OFF VALVE ø16/SOLD. | F/FK2,AM2/73+95+121,FK30/235 |
| 7944 | NON-RETURN VALVE ø12 | TYPE 3130/M12 (CASTEL) |
| 7945 | AIR GUIDE PLATE | HA12P |
| 7946 | SHUT-OFF VALVE 1/4"NPTF-7/16" | UNF HA/HG/O4+5,HA/HG6,HG(Z)7 |
| 7953 | AIR-COOLED COND. 4RR/24RH/6K | FOR FAN ø450 , SAM4/370L |
| 7954 | AIR-COOLED COND. 4RR/28RH/12K | FOR FAN ø450, SHG4/310SL |
| 7955 | AIR-COOLED COND. 4RR/48RH/10K | FOR FAN ø450 |
| 7956 | AIR-COOLED COND. 5RR/48RH/12K | FOR FAN MOTOR ø450 |
| 7965 | NON-RETURN VALVE ø18 | TYPE 3130/M18 (CASTEL) |
| 7970 | OIL SEPARATOR OS-67/54FH | WITH FOOT/WITH TÜV;F16 |
| 7972 | ROTOR 22KW | HG6/1080 |
| 7973 | ROTOR 26KW | HA6,HG6/1080S+1240+1410 |
| 7974 | ROTOR 30KW | HG6/1240S+1410S |
| 7990 | OIL PUMP COMPLETE | FK30+40+50 N+K+TK; |
| 8001 | SET-SHAFT SEAL | F1+2+3 |
| 8002 | SET-SHAFT SEAL | FK20 |
| 8003 | SET-SHAFT SEAL | F6 |
| 8004 | SET-SHAFT SEAL | FK1+2+3 |
| 8005 | SET-SHAFT SEAL | FK4+5+13,FK4/467 |
| 8006 | SET-SHAFT SEAL | AM0-2, AM2 NH3 |
| 8007 | SET-SHAFT SEAL | AM3, AM3 NH3 |
| 8008 | SET-SHAFT SEAL | F4+5+13,AM4, |
| 8012 | SET-SHAFT SEAL | F16 (NORMAL+NH3) |
| 8013 | SET-SHAFT SEAL | FK26 |
| 8015 | SET-PISTON-CONN.W.2 RINGS/32 | AM0+1,F/FK1 |
| 8016 | SET-PISTON-CONN.(40) | AM2/58 |
| 8017 | SET-PISTON-CONN.(45) | AM2/73 |
| 8018 | SET-PISTON-CONN.(40) | AM2/95 |
| 8019 | SET-PISTON-CONN.(45) | AM2/121,F/FK2 |
| 8020 | SET-PISTON-CONN.W.2 RINGS/50 | (OPTIMIZED) AM3/153,AM4/306 |
| 8021 | SET-PISTON-CONN.(55,OPTIM.) | (OPTIMIZED) AM3/185,AM4/370 |
| 8022 | SET-PISTON-CONN.(55,OPTIM.) | AM3/233,AM4/466,F/FK3+4 |
| 8023 | SET-PISTON-CONN.W.2 RINGS/70 | AM5/601 |
| 8024 | SET-PISTON-CONN.W.2 RINGS/70 | AM5/724 |
| 8025 | SET-PISTON-CONN.W.2 RINGS/70 | AM5/847,F/FK5 |
| 8026 | SET-PISTON-CONN.W.2 RINGS/70 | F6 |
| 8028 | SET-OILS.HEAT. 110-240V AC | (CA.50-120W) HH12P-34P +CO2 |
| 8030 | SET-PISTON ø32 | AM0+1,F/FK1 |
| 8031 | SET-PISTON ø40 | AM2/58+95 |
| 8032 | SET-PISTON ø45 | AM2/73+121,F/FK2 |
| 8035 | SET-PISTON ø70 | AM/F/FK5,F/FZ6 |
| 8036 | SET-VALVE PLATE | AM/F/FK1,AM0 |
| 8041 | SET-CRANKSHAFT 28 STROKE | F/FK1 |
| 8042 | SET-CRANKSHAFT 38 STROKE | F/FK2 |
| 8043 | SET-OIL PUMP | AM/F/FK1+2+3,AM0 |
| 8044 | SET-OIL PUMP | AM/F/FK4+5+13 |
| 8045 | SET-CRANKSHAFT 40 STROKE | HA/HG34P |
| 8046 | SET-CRANKSHAFT 55 STROKE | F6 |
| 8049 | SET-OIL-/GAS COMPENSATION NO.4 | W/O TUBE, AM/F/FK/4+5+13, |
| 8050 | SET-OIL-/GAS COMPENSATION NO.3 | W/O TUBE, AM/F/FK4+5+13, |
| 8051 | SET-OIL-/GAS COMPENSATION | DAM4+5 |
| 8052 | SET-CONNECTION SUCTION SIDE | DAM4 |
| 8053 | SET-CONNECTION SUCTION SIDE | DAM5 |
| 8054 | SET-CRANKSHAFT 49 STROKE | F/FK3 |
| 8055 | SET-CRANKSHAFT 49 STROKE | F/FK4 |
| 8056 | SET-CRANKSHAFT 55 STROKE | F5 |
| 8057 | SET-CRANKSHAFT 55 STROKE | FK5 |
| 8058 | SET-CRANKSHAFT 39 STROKE | AM4/306+370 |
| 8059 | SET-CRANKSHAFT 49 STROKE | AM4/466 |
| 8060 | SET-CRANKSHAFT 28 STROKE | AM0/1 |
| 8061 | SET-CRANKSHAFT 23 STROKE | AM2/58+73 |
| 8062 | SET-CRANKSHAFT 38 STROKE | AM2/95+121 |
| 8063 | SET-CRANKSHAFT 39 STROKE | AM3/153+185 |
| 8064 | SET-CRANKSHAFT 49 STROKE | AM3/233 |
| 8068 | SET-GASKETS | AM-F-FK 1 |
| 8069 | SET-GASKETS | AM/F/FK2, AM+F2NH3 |
| 8070 | SET-GASKETS | AM/F/FK3, AM+F3 NH3 |
| 8071 | SET-GASKETS | AM/F/FK4, AM+F4NH3 |
| 8072 | SET-GASKETS | F/FK5, F5NH3 |
| 8074 | SET-GASKETS | AM5, AM5 NH3 |
| 8076 | SET-CRANKSHAFT 39 STROKE | AM5/601 |
| 8077 | SET-CRANKSHAFT 47 STROKE | AM5/724 |
| 8078 | SET-CRANKSHAFT 55 STROKE | AM5/847 |
| 8081 | SET-CAP.REG.CR92 SP.V. | WITH CYL.COV. HA/HG34P |
| 8082 | SET-SHUT-OFF VALVE NS32 (AL) | FZ16/2051,FK24+26,FK40/465-655 |
| 8083 | SET-CAP.REG.CR92 24V DC | WITH CYLINDER COVER HA/HG34P |
| 8084 | SET-SHUT-OFF VALVE NS25 (AL) | AM/F/FK4+13,FK26/470+390+550, |
| 8085 | SET-SHUT-OFF VALVE NS32 | F6 |
| 8087 | SET-SHUT-OFF VALVE NS50 | F6+14+16,HA+HG+O5/945 |
| 8088 | SET-SHUT-OFF VALVE NS20 | AM/F/FK3,FK30 SOLD.ADAPT.STR. |
| 8090 | SET-SHUT-OFF VALVE NS20 | AM/FK/F3 ANGLE SOLDER.ADAP. |
| 8091 | SET-SHUT-OFF VALVE NS25 | AM/F/FK3,FK30/275+325 |
| 8092 | SET-SHUT-OFF VALVE NS25 | AM/FK/F3 ANGLE SOLDER.ADAP |
| 8096 | SET-TERMINAL BOX | AM5/601S+724+724S+847+847S, |
| 8100 | SET-SHUT-OFF VALVE NS20 (AL) | FK4/467,HA/HG/O4,FK40/385+390 |
| 8102 | SET-MOTOR PROT.MP10,AC 230V | HH3-8, HH12+22+34 P+e |
| 8103 | SET-MOTOR PROT.MP10,DC 24V | HH3-8, HH12+22+34 P+e |
| 8104 | SET-REAR BEARING | AM/FK4, AM4 NH3 |
| 8105 | SET-FRONT BEARING | AM5 |
| 8106 | SET-CAP.REG.CR92 230V AC | WITH CYL.COVER HA/HG34P |
| 8107 | SET-STEP BEARING | AM5/600-846S,AM5/723+846N |
| 8109 | SET-OIL PUMP | F6 |
| 8110 | SET-INSERT NON-RETURN VALVE | F6 |
| 8111 | SET-TUYERE PRESSURE BALANCE | FK3-5, HGX34 SH CO2 T |
| 8112 | SET-TERMINAL BOX | AM5/601,AM5/601-8/4 |
| 8113 | SET-REAR BEARING | AM5/847 |
| 8115 | SET-GASKETS | F6 |
| 8118 | SET-FIXING PARTS | FOR MOT.COMPR. AM0+1 |
| 8119 | SET-FIXING PARTS | FOR MOT.COMPR. AM2 |
| 8120 | SET-FIXING PARTS | FOR MOT.COMPR. AM3 |
| 8122 | SET-RUBBER-BONDED METAL | FDK6+14,FDK16 UP TO 30 KW |
| 8123 | SET-CONV. KIT WAT.-/AIR.COOLED | AM1/45S,AM2/58-121,AM2/58S+73S |
| 8124 | SET-CONV. KIT WAT.-/AIR.COOLED | AM3/153+153S+185+185S+233+233S |
| 8126 | SET-CONV. KIT AIR.-/WAT.COOLED | AM1/45S,AM2/58S+73S+95S+121S |
| 8127 | SET-CONV. KIT AIR.-/WAT.COOLED | AM3/153+153S+185+185S+233+233S |
| 8128 | SET-START UNL.230V AC | AM3 |
| 8130 | SET-SIGHT GLASS ø62 | AM/F/FK2-5+13,F6+14+16 |
| 8131 | SET-START UNL.230V AC | F/FK3 |
| 8139 | SET-FIXING PARTS | HH22P/e |
| 8141 | SET-START UNL.SU81-4/5 230V AC | AM/F/FK4+5 [NOT FOR NH3 USE!] |
| 8142 | SET-WC.CYLINDER COVER | AM3 |
| 8143 | SET-WC.CYLINDER COVER | F/FK3 |
| 8144 | SET-WC.CYLINDER COVER | AM/F/FK4 |
| 8146 | SET-WC.CYLINDER COVER F.CR | AM/F/FK4,FK4/467 |
| 8147 | SET-WC.CYLINDER COVER F.CR | AM/F/FK5,F6,F5NH3,FZ6 |
| 8148 | SET-CONV. KIT AIR.-/WAT.COOLED | AM0,AM1/45,AM2/58+73+95+121 |
| 8149 | SET-CONV. KIT WAT.-/AIR.COOLED | AM0,AM1/45 |
| 8152 | SET-FRONT BEARING | F1-2 |
| 8153 | SET-FRONT BEARING | F3 |
| 8154 | SET-REAR BEARING | AM0-2,F1-2,FK2 |
| 8155 | SET-REAR BEARING | AM/F/FK3 |
| 8157 | SET-REAR BEARING | F4-5,FK5 |
| 8158 | SET-FRONT BEARING | F/FK4 |
| 8160 | SET-TERMINAL BOX | AM0-3,AM2/121NH3,AM3/233NH3 |
| 8161 | SET-TERMINAL BOX | AM4,AM4/466NH3,AM4-8/4 |
| 8164 | SET-FRONT BEARING | F5+F5NH3 |
| 8178 | SET-FRONT BEARING | FK2 |
| 8198 | SET-VALVE PLATE | AM/F/FK3-4 REPL.FOR 08038 |
| 8200 | SET-VALVE PLATE HP-STAGE | FZ6 |
| 8201 | SET-AM-MOTOR TYPE 173,0-6 | AM0/45 |
| 8204 | SET-CONV. KIT WAT.-/AIR COOLED | AM2/95S+121S |
| 8205 | SET-AM-MOTOR TYPE 173,5-4 | AM1/45 |
| 8206 | SET-OILS.HEAT. 40W 24V DC | AM/F/FK1+2,AM0 |
| 8207 | SET-AM-MOTOR TYPE 175,0-4 | AM1/45S,AM2/58+58S+73 |
| 8208 | SET-OILS.HEAT.W.BASE PLATE | 40W 24V DC AM/F/FK1+2,AM0 |
| 8209 | SET-AM-MOTOR TYPE 176,5-4 | AM2/73S+95 |
| 8210 | SET-AM-MOTOR TYPE 177,5-4 | AM2/121 |
| 8211 | SET-AM-MOTOR TYPE 178,5-4 | AM2/95S+121S |
| 8212 | SET-AM-MOTOR TYPE 246,5-4 | AM3/233 |
| 8213 | SET-OILS.HEAT. 60W 24V DC | AM/F/FK3,HA/HG3 |
| 8214 | SET-OILS.HEAT.59-80W 24-28V DC | AM/F/FK4+5+13,FK24-50,HA/HG/O4 |
| 8215 | SET-AM-MOTOR TYPE 245,5-4 | AM3/153+153S+185 |
| 8217 | SET-AM-MOTOR TYPE 247,0-4 | AM3/185S+233S |
| 8219 | SET-AM-MOTOR TYPE 275,5-4 | AM4/306 |
| 8220 | SET-AM-MOTOR TYPE 275,5-4 | AM4/306 |
| 8221 | SET-AM-MOTOR TYPE 277,0-4 | AM4/306S+370 |
| 8223 | SET-AM-MOTOR TYPE 277,0-4 | AM4/306S+370 |
| 8224 | SET-AM-MOTOR TYPE 278,5-4 | AM4/370 |
| 8225 | SET-AM-MOTOR TYPE 279,5-4 | AM4/466 |
| 8226 | SET-AM-MOTOR TYPE 278,5-4 | AM4/370S |
| 8227 | SET-AM-MOTOR TYPE 2710,5-4 | AM4/466S |
| 8228 | SET-AM-MOTOR TYPE 279,5-4 | AM4/466 |
| 8229 | SET-AM-MOTOR TYPE 2710,5-4 | AM4/466S,AM5/600 |
| 8233 | SET-AM-MOTOR TYPE 2713,5-8/4 | AM5/601-8/4 |
| 8234 | SET-AM-MOTOR TYPE 2718,5-8/4 | AM5/601-8/4S |
| 8242 | SET-AM-MOTOR TYPE 277,0-8/4 | AM4/306-8/4 |
| 8243 | SET-AM-MOTOR TYPE 279,5-8/4 | AM4/306-8/4+370-8/4 |
| 8244 | SET-AM-MOTOR TYPE 2710,5-8/4 | AM4/370-8/4S,AM4/466-8/4 |
| 8245 | SET-VALVE PLATE | HG3/190+235,FK40/385N+465N |
| 8246 | SET-VALVE PLATE | HG3/275+325 |
| 8247 | SET-VALVE PLATE | HG4/385+465,FK26N |
| 8248 | SET-VALVE PLATE | HG4/555+650,FK24/555+650N |
| 8249 | SET-AM-MOTOR TYPE 2710,5-4 | AM5/601 |
| 8250 | SET-AM-MOTOR TYPE 2710,5-4 | AM5/601 |
| 8251 | SET-AM-MOTOR TYPE 2713,5-4 | AM5/601S+724 |
| 8252 | SET-AM-MOTOR TYPE 2713,5-4 | AM5/601S+724 |
| 8253 | SET-AM-MOTOR TYPE 2715,5-4 | AM5/724S+847 |
| 8254 | SET-AM-MOTOR TYPE 2715,5-4 | AM5/724S+847 |
| 8255 | SET-AM-MOTOR TYPE 2718,5-4 | AM5/847S |
| 8256 | SET-AM-MOTOR TYPE 2718,5-4 | AM5/847S |
| 8263 | SET-AM-MOTOR TYPE 173,0-6 | AM0/45 |
| 8264 | SET-AM-MOTOR TYPE 173,5-4 | AM1/45 |
| 8265 | SET-AM-MOTOR TYPE 175,0-4 | AM1/45S,AM2/58+58S+73 |
| 8279 | SET-AM-MOTOR TYPE 176,5-4 | AM2/73S+95 |
| 8280 | SET-AM-MOTOR TYPE 177,5-4 | AM2/121 |
| 8281 | SET-AM-MOTOR TYPE 178,5-4 | AM2/95S+121S |
| 8282 | SET-AM-MOTOR TYPE 245,5-4 | AM3/153+153S+185 |
| 8283 | SET-AM-MOTOR TYPE 246,5-4 | AM3/233 |
| 8284 | SET-AM-MOTOR TYPE 247,0-4 | AM3/185S+233S |
| 8285 | SET-AM-MOTOR TYPE 275,5-4 | AM4/306 |
| 8286 | SET-AM-MOTOR TYPE 277,0-4 | AM4/306S+370 |
| 8287 | SET-AM-MOTOR TYPE 278,5-4 | AM4/370S |
| 8288 | SET-AM-MOTOR TYPE 279,5-4 | AM4/466 |
| 8289 | SET-AM-MOTOR TYPE 2710,5-4 | AM4/466S |
| 8290 | SET-AM-MOTOR TYPE 2710,5-4 | AM5/601 |
| 8291 | SET-AM-MOTOR TYPE 2713,5-4 | AM5/601S+724 |
| 8292 | SET-AM-MOTOR TYPE 2715,5-4 | AM5/724S+847 |
| 8293 | SET-AM-MOTOR TYPE 2718,5-4 | AM5/847S |
| 8300 | SET-CONNECTING ROD | AM0+1,F/FK1 |
| 8301 | SET-CONNECTING ROD | AM2/58-73 |
| 8302 | SET-CONNECTING ROD | AM2/95-121,F/FK2 |
| 8303 | SET-CONNECTING ROD | AM3/153-185,AM4/306-370 |
| 8304 | SET-CONNECTING ROD | AM3/233,AM4/466,F/FK3-4,F3-GN |
| 8305 | SET-CONNECTING ROD | AM5/601 |
| 8306 | SET-CONNECTING ROD | AM5/724,HA/HG6,HG7,HGZ7/2110 |
| 8307 | SET-CONNECTING ROD | AM5/847,F/FK5,HA/HG/O5 |
| 8308 | SET-CONNECTING ROD | F6 |
| 8314 | SET-VALVE PLATE | AM/F/FK2 REPLACES 08037+08040 |
| 8315 | SET-FIXING PARTS FOR HOOD | AM4+5 |
| 8316 | SET-IMPELLER W.FLANGE F.CONVE. | AM4 |
| 8324 | SET-OIL PUMP | HH12P+22P+34P,HGX12P+22P CO2 |
| 8325 | SET-COMPRESSOR CASING | AM4/306 |
| 8326 | SET-COMPRESSOR CASING | AM4/370-466,F4 |
| 8329 | SET-CYLINDER COVER | AM/F/FK5/F6 W. ÜSV,F5NH3 |
| 8352 | SET-EL.MAG.CLUTCH LA.21 | FK20 |
| 8367 | SET-CONNECTING ROD | HA/HG3 |
| 8369 | SET-GASKETS | FZ6 |
| 8384 | SET-OIL PUMP F.DELTA-P SWITCH | FK24+26,HA/HG/O4+5,HGX4 CO2 |
| 8386 | SET-PISTON-CONN.W.2 RINGS/70 | FZ6 |
| 8387 | SET-CONNECTING ROD | FZ6 |
| 8397 | SET-CRANKSHAFT 58 STROKE | F16/1750+1751 |
| 8398 | SET-SHUT-OFF VALVE NS38 | F14+16,HG+O4/650,HA6 |
| 8400 | SET-CONNECTING ROD | F14/1165+1166,F16/1750+1751 |
| 8401 | SET-CONNECTING ROD | F14/1165+1166NH3, |
| 8402 | SET-CONNECTING ROD | F14/1365+1366NH3, |
| 8403 | SET-CRANKSHAFT 68 STROKE | F16/2050+2051 |
| 8404 | SET-AM-MOTOR TYPE 277,0-8/4 | AM4/306-8/4 |
| 8405 | SET-AM-MOTOR TYPE 279,5-8/4 | AM4/306-8/4S,AM4/370-8/4 |
| 8406 | SET-AM-MOTOR TYPE 2710,5-8/4 | AM4/370-8/4S,AM4/466-8/4 |
| 8407 | SET-AM-MOTOR TYPE 2713,5-8/4 | AM5/601-8/4 |
| 8408 | SET-AM-MOTOR TYPE 2718,5-8/4 | AM5/601-8/4S |
| 8417 | SET-CAP.REG.CR87 12V DC | W/O CYL.COVER AM/F/FK5,F6+14, |
| 8418 | SET-CAP.REG.CR87 24V DC | W/O CYLINDER COVER AM/F/FK5, |
| 8419 | SET-CAP.REG.CR87 230V AC | W/O CYLINDER COVER AM/F/FK5, |
| 8420 | SET-CAP.REG.CR87 SP.V. | W/O CYL.COV. AM/F/FK5,F6+14, |
| 8422 | SET-CONNECTING ROD | HA/HG22P+34P |
| 8423 | SET-OILS.HEAT. 40W 230V AC | AM/F/FK1+2,AM0 AS OF 09/87 |
| 8424 | SET-OILS.HEAT. 60W 230V AC | AM/F/FK3,HA/HG3 AS OF 09/87 |
| 8425 | SET-OILS.HEAT. 80W 230V AC | AM/F/FK4+5+13,FK24-50,HA/HG/O4 |
| 8426 | SET-OILS.HEAT.140W 230V AC | F6+14+16,HH5+6+7,O5,HG76e |
| 8427 | SET-OILS.HEAT. 40W 110-130V,SP | AM/F/FK1+2,AM0 AS OF 9/87 |
| 8428 | SET-OILS.HEAT. 60W 110-130V,SP | AM/F/FK3,HA/HG3 AS OF 09/87 |
| 8429 | SET-OILS.HEAT. 80W 110-130V,SP | AM/F/FK4+5+13,FK24-50,HA/HG/O4 |
| 8430 | SET-OILS.HEAT.140W 110-130V,SP | F6+14+16,HA/HG5+6,O5 A.OF 9/87 |
| 8435 | SET-CONNECTING ROD | F14/1365+1366,F16/2050+2051 |
| 8436 | SET-VALVE PLATE | AM/F/FK5,F6 REPLACES 08039 |
| 8439 | SET-BASE PLATE ELEVATED | F6+14+16 |
| 8440 | SET-CYLINDER COVER F.CR | AM/F/FK5,F6,F5NH3 |
| 8441 | SET-BLUE PAINT 1,000KG | SAM+F-COMPR. AND COND. UNITS |
| 8443 | SET-OILS.HEAT.W.BASE PLATE | 40W 220-240V AC AM/F/FK1,AM0 |
| 8444 | SET-SHAFT SEAL | F14 (NORMAL+NH3) |
| 8445 | SET-CRANKSHAFT 68 STROKE | F14/1365+1366 |
| 8447 | SET-CRANKSHAFT 58 STROKE | F14/1165+1166 |
| 8448 | SET-CRANKSHAFT 49 STROKE | FK4/467A |
| 8449 | SET-CONNECTING ROD | FK4/467A,FK30+40 |
| 8450 | SET-CYLINDER COVER | AM,AM/F/FK1 |
| 8451 | SET-CYLINDER COVER | AM/F/FK2 |
| 8452 | SET-CYLINDER COVER | AM/F/FK3 |
| 8453 | SET-CYLINDER COVER | AM/F/FK4 |
| 8456 | SET-OIL STRAINER | AM/F/FK4+5+13,FK24+26, |
| 8457 | SET-OIL STRAINER | F6+14+16 (+NH3) |
| 8459 | SET-DECOMPRES.VALVE M24X1,5 | ALL COMPRESSORS W.DECOM. VALVE |
| 8462 | SET-REAR/FRONT BEARING | FK24+26 |
| 8463 | SET-REAR BEARING | F6 |
| 8464 | SET-REAR BEARING | AM/F/FK13,AM5/601+724 |
| 8465 | SET-REAR BEARING | F14/1165+1365,F16/1750+2050 |
| 8478 | SET-DECOMPRES.VALVE (15BAR) | HGZ7 LP-STAGE |
| 8479 | SET-SIGHT GLASS | FOR ALL RECEIVERS |
| 8480 | SET-SHUT-OFF VALVE NS20 | F3+AM3/233NH3 |
| 8481 | SET-SHUT-OFF VALVE NS25 | F3+4,AM3/233,AM4/466NH3 |
| 8482 | SET-SHUT-OFF VALVE NS32 | F4+5,AM4/466NH3 |
| 8483 | SET-SHUT-OFF VALVE NS40 | F14+16 NH3 |
| 8484 | SET-SHUT-OFF VALVE NS50 | F14+16+18 NH3 |
| 8490 | SET-PISTON-CONN.W.3 RINGS/80 | 80 (OPT.) F14/1166,F16/1751 |
| 8491 | SET-PISTON-CONN.W.3 RINGS/80 | (OPTIMIZED) F14/1366,F16/2051 |
| 8492 | SET-GASKETS | F14/1166+1366 |
| 8493 | SET-GASKETS | F16/1751+2051 |
| 8494 | SET-GASKETS | FZ16/1570+1800+2051 |
| 8498 | SET-VALVE PLATE | F14+16(NEW SERIES),FZ16,HH6+7 |
| 8499 | SET-VALVE PLATE HP-STAGE | FZ16/1570+1800+2051 |
| 8510 | SET-START UNL.SU81-4/5 12V DC | AM/F/FK4+5 [NOT FOR NH3 USE!] |
| 8511 | SET-START UNL.SU81-4/5 24V DC | AM/F/FK4+5 [NOT FOR NH3 USE!] |
| 8512 | SET-START UNL.SU81-4/5 SP.V. | AM/F/FK4+5 [NOT FOR NH3 USE!] |
| 8527 | SET-START UNL.SU92 230V AC | WITH CYL. COVER HA/HG3+4 |
| 8533 | SET-OILS.HEAT.W.BASE PLATE,SP | 40W 110-130V=SP. AM/F/FK1,AM0 |
| 8534 | SET-GASKETS | HA+HG34P/215+255+315+380 |
| 8538 | SET-SOLENOID COIL 12V DC | FOR SU81+83, CR84+87, SU/CR92 |
| 8539 | SET-SOLENOID COIL 24V DC | FOR SU81+83, CR84+87, SU/CR92 |
| 8540 | SET-SOLENOID COIL 230V AC | FOR SU81+83, CR84+87, SU/CR92 |
| 8541 | SET-SOLENOID COIL 24V AC | FOR SU81+83, CR84+87, SU/CR92 |
| 8543 | SET-SOLENOID COIL SP.V. | FOR SU81+83, CR84+87, SU/CR92 |
| 8552 | SET-SIGHT GLASS ø22 | HH12P+22P+34P,HGX12P+22P CO2 |
| 8564 | SET-RUBBER-BONDED METAL | SAM0+1+2 RU,L,W,S |
| 8565 | SET-CAP.REG.CR87 230V AC | W. CYL. COV. AM/F/FK5,F/FZ6, |
| 8566 | SET-INSTRUM.PANEL (W.2 GAUGES) | SAM0-2,SHA/SHG3,DHH3 |
| 8567 | SET-INSTRUM.PANEL (W.3 GAUGES) | SAM3-5,SHA/SHG4+5+6,SHG7 |
| 8568 | SET-CAP.REG.CR87 12V DC | W. CYL. COV. AM/F/FK5,F6 |
| 8569 | SET-CAP.REG.CR87 24V DC | W.CYL.COV. AM/F/FK5,F6,FZ6 |
| 8571 | SET-CAP.REG.CR87 SP.V. | W. CYL. COV. AM/F/FK5,F6 |
| 8573 | SET-CAP.REG.CR84 24V DC | WITH CYL. COVER AM/F/FK4 |
| 8574 | SET-CAP.REG.CR84 230V AC | WITH CYLINDER COVER AM/F/FK4 |
| 8576 | SET-CAP.REG.CR84 SP.V. | WITH CYL. COVER AM/F/FK4 |
| 8579 | SET-RUBBER PLATE | S(D)AM,FDK3-14,DHH+SHH3-6 |
| 8580 | SET-RUBBER PLATE (MAFUND) | DHG7/SHG7,FDK16 |
| 8602 | SET-CAP.REG.CR84 12V DC | W/O CYL. COVER AM/F/FK4 |
| 8603 | SET-CAP.REG.CR84 24V DC | W/O CYLINDER COVER AM/F/FK4 |
| 8604 | SET-CAP.REG.CR84 230V AC | W/O CYLINDER COVER AM/F/FK4 |
| 8606 | SET-CAP.REG.CR84 SP.V. | W/O CYLINDER COVER AM/F/FK4 |
| 8612 | SET-SAFETY VALVE (28BAR) | FOR RECEIVER |
| 8629 | SET-SHAFT SEAL | AM5/601+724+847, AM5 NH3 |
| 8630 | SET-IMPELLER MOTOR W.CAPACITOR | HA4+5+6, HAX2 CO2T |
| 8635 | SET-CRANKSHAFT 47 STROKE | FK26/670+550 |
| 8636 | SET-CRANKSHAFT 33 STROKE | FK26/470+390 |
| 8637 | SET-CONNECTING ROD | FK26/550+670 |
| 8638 | SET-CONNECTING ROD | FK26/390+470 |
| 8668 | SET-INSTRUM.PANEL (W.3 GAUGES) | FDK4-16 |
| 8688 | SET-BASE PLATE LOWERED | FK24+26 |
| 8690 | SET-VALVE PLATE | HA+O4/385+465 |
| 8694 | SET-PISTON-CONN.W.2 RINGS/55 | (R.+OP)FK26/670N*FRIG.GROSSK |
| 8698 | SET-SIGHT GLASS ø18 | FK24+26, |
| 8700 | SET-GASKETS | FK26N |
| 8703 | SET-CAP.REG.CR87 12V DC | W. CYL. COV. FK24+26+40N, |
| 8704 | SET-CAP.REG.CR87 24V DC | W.CYL.COVER FK24-50N,HA/HG/O4 |
| 8705 | SET-CAP.REG.CR87 230V AC | W. CYLINDER COVER FK24+26+40N, |
| 8707 | SET-CAP.REG.CR87 SP.V. | W.CYL.COV. FK24+26+40N, |
| 8708 | SET-CAP.REG.CR87 12V DC | W. CYL. COV. FK24+26+40K |
| 8709 | SET-CAP.REG.CR87 24V DC | W. CYLINDER COVER FK24-50K |
| 8710 | SET-CAP.REG.CR87 230V AC | W. CYLINDER COVER FK24+26+40K |
| 8712 | SET-CAP.REG.CR87 SP.V. | W. CYLINDER COVER FK24+26+40K |
| 8715 | SET-PISTON-CONN.W.2 RINGS/55 | (OPTIMIZED) FK26/670 |
| 8716 | SET-PISTON-CONN.W.2 RINGS/50 | (OPTIMIZED) FK26/550 |
| 8717 | SET-PISTON-CONN.W.2 RINGS/55 | (OPTIMIZED) FK26/470 |
| 8718 | SET-PISTON-CONN.W.2 RINGS/50 | (OPTIMIZED) FK26/390 |
| 8720 | SET-GASKETS | FK26K |
| 8722 | SET-GASKETS | F16/1750+2050 |
| 8723 | SET-VALVE PLATE | F14/1165+1365 STANDARD+NH3 |
| 8727 | SET-COMPRESSOR CASING | F4NH3 |
| 8745 | SET-RUBBER-BONDED METAL | FDK5,SFD5,FG5 |
| 8752 | SET-FIXING PARTS | SDAM4+5 L+RU+W W.8/4 POL.COMP. |
| 8754 | SET-FIXING PARTS | AM4/306+370+466-4 |
| 8755 | SET-FIXING PARTS | AM5/601+724+847-4 |
| 8757 | SET-RUBBER-BONDED METAL | SAM3/153RU,L,S,LD,W,S |
| 8758 | SET-PISTON ø55 (CONTOURED) | F3+4NH3,AM3/233S+AM4/466SNH3 |
| 8761 | SET-PISTON-CONN.W.3 RINGS/55 | F3+4NH3,AM3/233S+AM4/466SNH3 |
| 8762 | SET-PISTON-CONN.W.3 RINGS/70 | F5+AM5/847S NH3 |
| 8768 | SET-MOT.CASI.+STAT.22KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8769 | SET-MOT.CASI.+STAT.26KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8770 | SET-RUBBER-BONDED METAL | FDK1-4,SFD2-4 |
| 8771 | SET-WEATHERPROOF HOOD | SHA22P/190 L, SHG22P/190 L+SL |
| 8772 | SET-WEATHERPROOF HOOD | SHA+SHG22P/125+160 L, |
| 8780 | SET-MOT.CASI.+STAT.30KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8782 | SET-SHUT-OFF VAL.ø16/SOLD *EX | EX-HG12P SV RAL5007 |
| 8783 | SET-SHUT-OFF VAL.NS20/SOLD *EX | EX-HG34P/215 SV RAL5007 |
| 8784 | SET-SHUT-OFF VAL.ø22/SOLD *EX | EX-HG22P SV RAL5007 |
| 8785 | SET-SHUT-OFF VAL.NS25/SOLD *EX | EX-HG34P/255+315+380SV RAL5007 |
| 8786 | SET-MOT.CASI.+STAT.26KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8795 | SET-OIL PUMP | F14/1166+1366,F16/1751+2051 |
| 8799 | SET-OIL PUMP | F14+16 NH3 (NEW SERIES) |
| 8805 | SET-OIL PRESSURE SAFETY SWITCH | DANFOSS MP54,F14+16+18 |
| 8806 | SET-OIL PRESSURE SAFETY SWITCH | DANFOSS MP55A,F14+16+18NH3 |
| 8809 | SET-SHUT-OFF VALVE ø12/SOLD | HA12PP+22P |
| 8810 | SET-CAP.REG.CR92 230V AC | W. CYL. COV. F14+16 NEW SERIE |
| 8812 | SET-CAP.REG.CR92 230V AC | W.WAT.CYL.COV.F14+16 NEW SERIE |
| 8813 | SET-START UNL.SU92 230V AC | W.WAT.CYL.COVER F14+16 NEW |
| 8815 | SET-CAP.REG.CR92 SP.V. | W. CYL. COVER F14+16 NEW SERIE |
| 8817 | SET-CAP.REG.CR92 SP.V. | W.WC.CYL.COVER F14+F16 NEW SER |
| 8819 | SET-START UNL.SU92 SP.V. | W. WAT. CYL. COVER F14+16 NEW |
| 8820 | SET-CYLINDER COVER STANDARD | F14/1166+1366,F16/1751+2051 |
| 8821 | SET-SU/CR92 230V AC | HA/HG/O,F14+16 NEW SERIES |
| 8822 | SET-SU/CR92 SP.V. | HA/HG/O,F14+16 NEW SERIES |
| 8823 | SET-SU/CR92 24V DC | HA/HG/O,F14+16 NEW SERIES |
| 8824 | SET-PISTON-CONN.W.3 RINGS/80 | (OPT.) F14/1166NH3,F16/1751NH3 |
| 8825 | SET-PISTON-CONN.W.3 RINGS/80 | (OPT.) F14/1366NH3,F16/2051NH3 |
| 8826 | SET-PISTON-CONN.W.3 RINGS/70 | HA+HG+O5/725 |
| 8827 | SET-PISTON-CONN.W.3 RINGS/75 | HA+HG+O5/830 |
| 8828 | SET-PISTON-CONN.(80,OPTIM.) | (80,OPTIM.) HA+HG+O5/945 |
| 8829 | SET-SHUT-OFF VALVE ø22/SOLD | HG22P,HG34P/315+380,HGX22P CO2 |
| 8830 | SET-CYLINDER COVER F.CR92 | F14/1166+1366,16/1751+2051 |
| 8832 | SET-CYLINDER COVER F.CR84 | AM/F/FK4 |
| 8833 | SET-SHUT-OFF VALVE ø12/SOLD | F/FK1,AM0-1,AM2/58 |
| 8834 | SET-SHUT-OFF VALVE ø16/SOLD | F/FK2,AM2/73+95+121,FK30/235 |
| 8835 | SET-VENTILATOR C.ø350 230V AC | 1-PH,50/60HZ 35° DECALAGE |
| 8836 | SET-VENTILATOR C.ø420 230V AC | 1-PH,50/60HZ ,25° DECALAGE |
| 8837 | SET-VENTILATOR C.ø450 230V AC | 1-PH,50/60HZ ,30°DECALAGE |
| 8838 | SET-SHUT-OFF VALVE NS25 | HA/HG34P |
| 8841 | SET-VALVE PLATE | F2+AM2/121 NH3 |
| 8842 | SET-VALVE PLATE NH3 | F3+4NH3,AM3/23NH3,AM4/466NH3 |
| 8843 | SET-VALVE PLATE NH3 | F5+AM5/847S NH3 |
| 8844 | SET-VALVE PLATE NH3 | F14+16 NH3 (NEW SERIES) |
| 8845 | SET-CONNECTING ROD | AM2/121NH3,F2NH3 |
| 8846 | SET-CONNECTING ROD | F3+4NH3 |
| 8847 | SET-CONNECTING ROD | F5NH3 |
| 8848 | SET-PISTON-CONN.(45) | AM2/121NH3,F2NH3 |
| 8851 | SET-VALVE PLATE | HA/HG/O5 |
| 8853 | SET-CRANKSHAFT 47 STROKE | HA/HG5 |
| 8855 | SET-SIGHT GLASS ø22 *EX | EX-HG12P+22P+34P |
| 8856 | SET-OIL STRAINER *EX | EX-HG12P |
| 8859 | SET-SHUT-OFF VALVE ø16/SOLD | HG12P,HH22P+34P,HGX12P+22P CO2 |
| 8860 | SET-THERM PROT.TH.1/8"NPTF *EX | (RESISTOR-TRACER)EX-HH |
| 8861 | SET-VALVE PLATE *EX | EX-HG22P/125,EX-HG34P/215+255 |
| 8862 | SET-VALVE PLATE *EX | EX:HG22P/160+190,HG34P/315+380 |
| 8863 | SET-GASKETS *EX | EX-HG34P/215+255+315+380 |
| 8864 | SET-OIL PUMP *EX | EX-HG12P+22P+34P,BLUE RAL 5007 |
| 8865 | SET-MOT.PROT.MP10,AC 230V *EX | EX-HG12P+22P+34P |
| 8866 | SET-AC-DOUBLE BARRIER *EX | EX-HG12P+22P+34P |
| 8870 | SET-FIXING PARTS | HG4/HA4 |
| 8872 | SET-FIXING PARTS | SAM 2/LD+SLD+ESLD |
| 8873 | SET-FIXING PARTS | SAM 3/LD |
| 8874 | SET-FIXING PARTS | (EX-)HH5+6, HHX2 CO2 T |
| 8875 | SET-FIXING PARTS | HA/HG3, SHA4*PERO* |
| 8876 | SET-FIXING PARTS | HG7+76e, HGZ7 |
| 8888 | SET-VALVE PLATE | HA+HG+O4/310 |
| 8889 | SET-VALVE PLATE | HA+O4/555+650 |
| 8891 | SET-PISTON ø45 | HA+HG+O4/310,HA+HG3/155 |
| 8894 | SET-CONNECTING ROD | HA/HG/O4,FK24 |
| 8895 | SET-PISTON-CONN.W.2 RINGS/45 | HA+HG+O4/310 |
| 8896 | SET-PISTON-CONN.W.2 RINGS/50 | (OPTIMIZD) HA+HG+O4/385 |
| 8897 | SET-PISTON-CONN.W.2 RINGS/55 | (OPTIMIZED) HA+HG+O4/465 |
| 8898 | SET-PISTON-CONN.W.2 RINGS/60 | (OPT.)HA+HG+O4/555,FK24/555 |
| 8899 | SET-PISTON-CONN.W.2 RINGS/65 | (OPT.) HA4+HG4+O4/650,FK24/650 |
| 8900 | SET-CRANKSHAFT 49 STROKE | HA/HG4,HGX4 CO2 |
| 8904 | SET-MOT.CASI.+STAT.7,5KWS/SS | 380-420 50HZ (440-480V 60HZ) |
| 8905 | SET-MOT.CASI.+STAT.9KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8906 | SET-MOT.CASI.+STAT.9KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8907 | SET-MOT.CASI.+STAT.11KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8908 | SET-MOT.CASI.+STAT.11KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8909 | SET-MOT.CASI.+STAT.11KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8910 | SET-MOT.CASI.+STAT.15KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8911 | SET-MOT.CASI.+STAT.15KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8912 | SET-MOT.CASI.+STAT.15KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8913 | SET-GASKETS | HA+HG4/310+385+465+555+650 |
| 8916 | SET-GASKETS | O4 |
| 8919 | SET-AIR GUIDE HOOD | HA4 |
| 8920 | SET-OIL PRESSURE SAFETY SWITCH | DANFOSS MP54,HA/HG/O4+5 |
| 8921 | SET-THERM PROT.TH.1/8"NPTF | (RESISTOR-TRACER) HH3-8+PLUSC. |
| 8926 | SET-VALVE PLATE | FK24/555+650K,FK26K,FK50K |
| 8944 | SET-COMPRESSOR CASING | FK5 |
| 8945 | SET-COMPRESSOR CASING | FK5A |
| 8946 | SET-COMPRESSOR CASING | FK3A |
| 8948 | SET-CAP.REG.CR92 230V AC | W.CYLINDER COVER HH5+6+7+8,O5 |
| 8949 | SET-TERMINAL BOARD | HA/HG4+5+6,HGX4 CO2,HG44e+56e |
| 8951 | SET-CRANKSHAFT 70 STROKE | HA/HG6 |
| 8953 | SET-WC.CYLINDER COVER | F14,F16,HH/O5,HH6,HG7,HG8,FZ16 |
| 8954 | SET-CYLINDER COVER F.CR92 | HA/O5,HG5+6+7+8 |
| 8955 | SET-MOT.CASI.+STAT.5,5/11KW | D/SS 380-420V 50HZ |
| 8961 | SET-GASKETS | HA/HG5 |
| 8963 | SET-MOT.CASI.+STAT.18,5KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8964 | SET-MOT.CASI.+STAT.15KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8966 | SET-MOT.CASI.+STAT.15KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8967 | SET-MOT.CASI.+STAT.11KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8968 | SET-MOT.CASI.+STAT.15KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8969 | SET-MOT.CASI.+STAT.18,5KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8976 | SET-WC.CYLINDER COVER F.SU92 | F14,F16,HH/O5,HH6,HG7,HG8,FZ16 |
| 8978 | SET-MOT.CASI.+STAT.18,5KW S/SS | 380-420 50HZ (440-480V 60HZ) |
| 8979 | SET-SHAFT SEAL BM-40 | O5 |
| 8981 | SET-START UNL.SU92 230V AC | WITH WAT.CYL.COVER HHG5+6+7 |
| 8983 | SET-FIXING PARTS | (EX-)HH12P,HGX12P CO2 |
| 8991 | SET-COMPRESSOR CASING | AM2/58+95+MF |
| 8995 | SET-PISTON-CONN.W.3 RINGS/70 | HA+HG6/1080,HG(Z)7/1620 |
| 8996 | SET-PISTON-CONN.W.3 RINGS/75 | HA+HG6/1240,HG(Z)7/1860 |
| 8998 | SET-OIL PRESSURE SAFETY SWITCH | DANFOSS MP54,HA/HG6 |
| 8999 | SET-OIL PRESSURE SAFETY SWITCH | DANFOSS MP54,HG(Z)7,HG8,HG88e |
| 9002 | CONN.PART F.ESK/AC+R SYST. | AM/F2-5,F6+13+14+16 |
| 9120 | ASSEMBLY ANGLE F.OIL PRESS.SW. | AM/F/FK4 |
| 9215 | SERVICE BOX COMPLETE | ASSEMBLY TOOLS FOR MOTORS |
| 9304 | KEY FOR MOTOR INSTALLATION | AM1+2 |
| 9439 | ASSEMBLY KEY FOR ROTORS | AM4+5 |
| 9489 | ROTOR EXTRACTOR TOOL | AM1-5 |
| 9524 | SOCKET FOR WRENCHES | F.UNIV. SAFETY VALVE |
